willxx23 Posted September 7, 2005 Share Posted September 7, 2005 I would suggest mailing a money order/bank check to me, made payable to the seller. (I'll get that info). With Paypal, if you guys send me money, a small percentage is deducted for the transer. If you guys have a better idea, let me know. Here is the seller's email address if anyone wishes to contact him directly with any questions or payment options. xenonpros@xenonpros.com Rich Rich, if you can tell me how much Paypal takes out I will include enough to cover that fee, it will be worth it not to have to go to the post office or bank. I thought that Paypal took that fee for CC payments not bank acct. funded payments? Quote Link to comment Share on other sites More sharing options...
StPeteXX Posted September 7, 2005 Author Share Posted September 7, 2005 I've had cash sent to me via paypal hundreds of times. Each time, there has been a small fee based on the amount sent to me. $135 would be around a $5 fee. Perhaps we should set a date for next week after everyone returns from NEXXT so they can get in on it too if desired?? Rich Quote Link to comment Share on other sites More sharing options...
blkbrdrydr Posted September 7, 2005 Share Posted September 7, 2005 I've had cash sent to me via paypal hundreds of times. Each time, there has been a small fee based on the amount sent to me. $135 would be around a $5 fee. Rich Here's the fee schedule from PayPal but my experience is limited to transfers made from PayPal to my bank account http://www.paypal.com/us/cgi-bin/webscr?cm...ay-fees-outside Quote Link to comment Share on other sites More sharing options...
ironmike Posted September 8, 2005 Share Posted September 8, 2005 .. to give some more members a chance to participate - especially after a long dark ride home post-NEXXT... might even bump the numbers into another "discount range" ..? Good idea! At any rate, Rich, I'm in for a single (5000K, H7). Whenever you settle on the date, PM me with your snail-mail info; it'll be a check - I closed my PP account last year after it was hacked. 8) Quote Link to comment Share on other sites More sharing options...
beondwacko Posted September 8, 2005 Share Posted September 8, 2005 Guy's ; This is the guy I bought from on ebay. "hidseller" He sells the Mcoulloch kits. They have the seperate ballasts and starters whick makes for easier mounting. It's a 5300K kit. I have rarely seen them selling for more than $210.00 !! He's got one up for sale now , and I bet if you offered him a group buy ,, he'd prob' go for $150.00. His shipping is super fast, and he offers the kit in all lamp types. I have one kit in my XX , and another in my S-10 P/u. Chase him down guys ! You won't be sorry with the merchandise ! Quote Link to comment Share on other sites More sharing options...
ar50racer Posted September 10, 2005 Share Posted September 10, 2005 I send a message to hidseller and left a link to this thread. $150 bucks for both high/low would be awsome! Quote Link to comment Share on other sites More sharing options...
Ronnie Posted September 10, 2005 Share Posted September 10, 2005 So is $135.00 the price for the 1/2 kit ? Quote Link to comment Share on other sites More sharing options...
ar50racer Posted September 11, 2005 Share Posted September 11, 2005 Not meaning to offend St. Pete, but I emailed "hidseller" and this is it. Yes, everything included. It is a plug n play McCulloch Kit.. $185 shipped. All low beam model available. For H4 hi/low, additional $110/ set. Sounds like a damn good price! Quote Link to comment Share on other sites More sharing options...
tgo63 Posted September 11, 2005 Share Posted September 11, 2005 Not meaning to offend St. Pete, but I emailed "hidseller" and this is it.Yes, everything included. It is a plug n play McCulloch Kit.. $185 shipped. All low beam model available. For H4 hi/low, additional $110/ set. Sounds like a damn good price! so to make clear for everyone; $185 is for a kit which means 2 single bulbs/ballasts? This would come to $92.50 per person for H7 bulb low beam? If this is a case sign me in Does this also means I can buy kit for $185 and put one H7 in low beam and another H7 in high beam? we talking about 5300 kit? Thanks Quote Link to comment Share on other sites More sharing options...
beondwacko Posted September 11, 2005 Share Posted September 11, 2005 TGO63 ; That's what I did !! Quote Link to comment Share on other sites More sharing options...
ar50racer Posted September 11, 2005 Share Posted September 11, 2005 I'm nailing down the final details right now. Quote Link to comment Share on other sites More sharing options...
Warchild Posted September 13, 2005 Share Posted September 13, 2005 Did ya come up with anything, Paully? Rich? Anyone? I've read this thread a couple times (maybe I read it too fast....), but I'm still unsure where it is going..... Quote Link to comment Share on other sites More sharing options...
Ronnie Posted September 13, 2005 Share Posted September 13, 2005 Did ya come up with anything, Paully? Rich? Anyone?I've read this thread a couple times (maybe I read it too fast....), but I'm still unsure where it is going..... +1 Quote Link to comment Share on other sites More sharing options...
ar50racer Posted September 13, 2005 Share Posted September 13, 2005 OK here is the deal. It is a plug n play McCulloch Kit.. 2 x ?000K Xenon Bulbs 2 x Ballasts 2 x Igniters Instruction Manual All low beam models available. 5000k, 6000k, 8000k, 10000k, Models Available H1, H3, H4, H7, H11, 9004, 9005, 9006, 9007 $185 shipped. For 5300k. For 6000K, 8000K, and 10000K, it is an increment of $10 for each higher Kelvin rating. For H4 hi/low, additional $110/ set. Warchild said the 5300k would be the brightest. You can pay and order by paypal instant transfer only, no credit card payment, at this special rate, cannot accept credit card payment. Paypal address is anchiu35@hotmail.com (hidseller, 160+ on ebay) The order though Paypal will need this is the Info. 1."CBR1100XX Group Buy" in the "Email Subject" line. 2.Then in the "Note" section, write the exact model and quantity that you want, plus Shipping information and a phone number, they will be shipped by FX. If you only want half a kit find someone to go halves with. If you don't have Paypal we can figure something out. additional shipping charge for Canada $5, for Thaliand $8, for Europe $10. Just receive a confirmation, I am able to continue with the group buy until 9/30. Please let your people know about this. And I can offer this speical rate in below: $185 for a set of 5300K McCulloch HID Kit $196 for a set of 6000K McCulloch HID Kit $200 for a set of 8000K McCulloch HID Kit This is cheap! Quote Link to comment Share on other sites More sharing options...
tgo63 Posted September 13, 2005 Share Posted September 13, 2005 The price is great. Rich should get extra discount for starting this thread. What's the deal with H4 hi/low for additional $110 set. What's a difference from H7? Quote Link to comment Share on other sites More sharing options...
willxx23 Posted September 13, 2005 Share Posted September 13, 2005 Who want's to go halves w/me? Quote Link to comment Share on other sites More sharing options...
ar50racer Posted September 13, 2005 Share Posted September 13, 2005 St.Pete had a great idea, I did the leg work on this. The H4 is duel element vs. single. Quote Link to comment Share on other sites More sharing options...
Iceman_40 Posted September 13, 2005 Share Posted September 13, 2005 I don't think I'll have the $$ unfortunatly but I'll ask incase I get my back pay before the buy is over. Do they ship to Canada? any idea how much extra for shipping if they do? Edit also any idea how long this will last? Quote Link to comment Share on other sites More sharing options...
tgo63 Posted September 13, 2005 Share Posted September 13, 2005 Who want's to go halves w/me? I would like to go halve with you. I was thinking about installing high/low but since I will have to get new tires soon I will be happy with low beam conversion. Can you email me at tgo63 at yahoo com how we could do this? Quote Link to comment Share on other sites More sharing options...
ar50racer Posted September 13, 2005 Share Posted September 13, 2005 I don't think I'll have the $$ unfortunatly but I'll ask incase I get my back pay before the buy is over.Do they ship to Canada? any idea how much extra for shipping if they do? Edit also any idea how long this will last? Go head and email him directly. hidseller@hotmail.com Quote Link to comment Share on other sites More sharing options...
brianmacza Posted September 13, 2005 Share Posted September 13, 2005 Guys... do yourselves a favour - install both HI and LO Best money I could have spent!! Damn, my lights are good now with 6000k bulbs - I didn't have the option of 5300k or I would have gone for it. Quote Link to comment Share on other sites More sharing options...
XXTi Posted September 13, 2005 Share Posted September 13, 2005 OK. I'm an HID idiot, but why are the bulbs shown as "low beam models"? Can't they be used for high beam too? Quote Link to comment Share on other sites More sharing options...
Guest rockmeupto125 Posted September 13, 2005 Share Posted September 13, 2005 I believe he's referrencing other bulb styles. Not many cars use H7 bulbs as we do, and the majority market is automotive, not motorcycle. They will have two styles of bulbs....low beam only, and hi/lo beam with two filaments. HID has no filament...so is a single output per bulb....hence the "low beam only" moniker. Quote Link to comment Share on other sites More sharing options...
birdie_xx Posted September 13, 2005 Share Posted September 13, 2005 My low beam is 6000K so I guess I'd go for the second bulb in the same output... I could split with someone....I guess. :twisted: The 6000K are $195 then ? Quote Link to comment Share on other sites More sharing options...
XXTi Posted September 13, 2005 Share Posted September 13, 2005 I believe he's referrencing other bulb styles. Not many cars use H7 bulbs as we do, and the majority market is automotive, not motorcycle. They will have two styles of bulbs....low beam only, and hi/lo beam with two filaments. HID has no filament...so is a single output per bulb....hence the "low beam only" moniker. Thanks Joe. That sheds more light on things. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.