RXX Posted February 14, 2015 Share Posted February 14, 2015 I just bought a set of plugs for my 93 F150 302 FI. Before I get further in than I can back out, are there any surprises? Like having to unfasten motor mounts, dropping the engine, taking off the hood, stuff like that? I hate those sort of surprises. Quote Link to comment Share on other sites More sharing options...
blackhawkxx Posted February 14, 2015 Share Posted February 14, 2015 I had 93 F-250 with a 351-W so I guess that it would be similar. The hardest thing was getting the wires off the plugs because you can't get your hand where it needs to be. So if you have been thinking about adding a set of new wires, this would be the time. Quote Link to comment Share on other sites More sharing options...
XXitanium Posted February 16, 2015 Share Posted February 16, 2015 A friend of mine and I did the kids '92 F150. It was fast. Do the rotor cap too since you're in there. Quote Link to comment Share on other sites More sharing options...
OMG Posted February 16, 2015 Share Posted February 16, 2015 Really helps to have the tool made to grab the wire boot at the plug to pull it off. Quote Link to comment Share on other sites More sharing options...
superhawk996 Posted February 17, 2015 Share Posted February 17, 2015 Nothing special to do doing it. Which plugs did you get? I stick with motorcraft or autolite on them. Quote Link to comment Share on other sites More sharing options...
SR71BLACKBIRDXX Posted February 17, 2015 Share Posted February 17, 2015 Good advice here. It's a straight forward job. +1 on Motocraft plugs If your NOT replacing the wires then +2 on the boot tool. You'll most likely fubar the boots/wires if you try to pull them off by hand. If your putting new wires on, then yank away! Quote Link to comment Share on other sites More sharing options...
RXX Posted February 18, 2015 Author Share Posted February 18, 2015 Good advice here. It's a straight forward job. +1 on Motocraft plugs If your NOT replacing the wires then +2 on the boot tool. You'll most likely fubar the boots/wires if you try to pull them off by hand. If your putting new wires on, then yank away! Yeah I bought Motocraft plugs last week. Thanks to you guys I am spending the extra cash for wires, rotor and cap. Hell, I might even buy a new key fob while I'm at it, make her look all pretty. You know, kind of like a new set of earrings to go with her new panties. Quote Link to comment Share on other sites More sharing options...
XXitanium Posted February 18, 2015 Share Posted February 18, 2015 (edited) Yours probably isn't even too rusty. Edited February 18, 2015 by XXitanium Quote Link to comment Share on other sites More sharing options...
RXX Posted February 19, 2015 Author Share Posted February 19, 2015 Yours probably isn't even too rusty. Haven't even thought of that. It may look like a POS, but at least it is still patent. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.