The Krypt Keeper Posted July 17, 2004 Share Posted July 17, 2004 I got Mothers, some stuff called Purple, tried the little cans of cotton wading. I need to polish up my exhaust and wanting to try something else. Also would would be good to get the burnt rubber off my mid pipes from my riding boots :roll: That is baked on good :mad: Quote Link to comment Share on other sites More sharing options...
demon Posted July 17, 2004 Share Posted July 17, 2004 I use the sandpaper method. Depending on the surface finish, I usually start off with 1000 grit, go to 1500 grit and finish things off with 2000 grit. After sanding is when I'll get out the mothers and buff it out. Quote Link to comment Share on other sites More sharing options...
The Krypt Keeper Posted July 17, 2004 Author Share Posted July 17, 2004 will try that on the midpipes... :shock: surely wont do that to my Leo Vince pipes Quote Link to comment Share on other sites More sharing options...
nickc2s Posted July 17, 2004 Share Posted July 17, 2004 Met-all.com Quote Link to comment Share on other sites More sharing options...
ncblkbrd1100xx Posted July 18, 2004 Share Posted July 18, 2004 You could probably use some toluene or something called brush and roll cleaner from Lowes. Use some fine steel wool and it should come straight off! Quote Link to comment Share on other sites More sharing options...
voodooxx Posted July 18, 2004 Share Posted July 18, 2004 polishing all depends on what you want to polish out (i.e. light scratches, deep scratches, etc). mothers is good only if you already have a pretty smooth surface. it gives that really good shine. it is more of a finishing product. for the heavy stuff you will have to move up to either white, brown or black rouge sticks. use this with a buffing wheel. for even more heavy stuff you will have to move up to steel wool or wet sandpaper. start with a coarse grit and work your way down to a real fine. then you will have to go to the rouges then finish with mothers or similar. since you are talking about your exhaust pipe. i assume its not too bad a condition. you may just need to get a buff for your drill (lowes) and some rouge sticks (lowes). take it easy then finish with mothers to get the fine scratches out and make it shine. Quote Link to comment Share on other sites More sharing options...
Kbird Posted July 18, 2004 Share Posted July 18, 2004 I've used oven cleaner to get rubber and other burnt items off my pipes. Make sure you just spray the affected area and cover the plastics with old towels or something, leave it on for a hour or so and it comes off fairly easily. I heard the CHP in So Cal use this. Quote Link to comment Share on other sites More sharing options...
The Krypt Keeper Posted July 18, 2004 Author Share Posted July 18, 2004 I don't have scratches and stuff on my exhaust, Just looking for something good keep up the shine on my pipes :wink: will have to see what works on the midpipes, making my bike look dirty :wink: Quote Link to comment Share on other sites More sharing options...
voodooxx Posted July 18, 2004 Share Posted July 18, 2004 to just keep the shine i use mothers and an old over the calf tube sock. rub some on and use the sock to buff. the sock makes it easy to really get some back and forth motion going. works good to get around the pipe. Quote Link to comment Share on other sites More sharing options...
The Krypt Keeper Posted July 18, 2004 Author Share Posted July 18, 2004 to just keep the shine i use mothers and an old over the calf tube sock.rub some on and use the sock to buff. the sock makes it easy to really get some back and forth motion going. works good to get around the pipe. I am so glad I am not the only person that does this... :grin: Quote Link to comment Share on other sites More sharing options...
AZITPRO Posted July 19, 2004 Share Posted July 19, 2004 I use old socks to clean my chain with brake cleaner. Quote Link to comment Share on other sites More sharing options...
joe Posted July 20, 2004 Share Posted July 20, 2004 For the rubber skuffs that are burned on from your boots, use Brasso. This stuff will melt that material right off. It's particularly good for this use because it won't scratch your metal. You can get it just about anywhere: Walmart, grocery store, etc. Joe Quote Link to comment Share on other sites More sharing options...
bigmac72 Posted August 9, 2004 Share Posted August 9, 2004 I use two polishes for the bare metal on the bird. Autosol and Autosol fine. And Meguiars. (sorry, that's three). They will take out minor scratches and boot marks (even if nice and heavy). If you want that nice mirror finish afterward thats what the Autosol Fine is for. Quote Link to comment Share on other sites More sharing options...
RodeRash Posted August 10, 2004 Share Posted August 10, 2004 I use old socks to clean my chain with brake cleaner. Are you using o-ring safe brake cleaner :?: Quote Link to comment Share on other sites More sharing options...
blkbrdrydr Posted August 11, 2004 Share Posted August 11, 2004 Absolutely the best shit that I've ever used to polish metal on my bikes http://badtothebom.com/id19.htm Quote Link to comment Share on other sites More sharing options...
Obby Posted August 11, 2004 Share Posted August 11, 2004 Am i the only one that uses Rolite AP300 airplane polish :roll: . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.