Kbird

[attachmentid=2159][attachmentid=2158] You can't use a magnetic tank bag on top of the Bagster, you need to by a specific tank bag from Bagster. I tried setting my Marsee magnetic on top of the Bagster cover and it won't hold, either the cover is to thick or magnets not strong enough to hold. If you are worried about scratches, I've never had problems my Marsee bag scratching my tank. Bagster is not as fast as a magnetic tank bag to remove as you have four clips to undo.

I have the cover and expandable tank bag, heavy duty material. Fit and material is of good quality. Only thing I don't like is the map pocket, harder to get maps in and out. My Marsee worked better for that. Let me know if you want me to email you some pics.

+1 for the polished set

Thanks for the help

I plan on changing my chain and sprockets - how difficult is it to remove the front sprocket. do you need a impact wrench. Will a electric one work or do you need a air impact? With having to buy a chain tool and impact wrench it may be cheaper to have a dealer do it. But may not be done better.

I use the BMW type plugs. Here are a couple site with pictures of different set-ups. http://www.electricalconnection.com/power-...tion/pplate.htm http://www.powerletproducts.com/products/s...ke_rearset2.php I only use the BMW plug for my vest which is tucked under the seat when needed, my GPS and radar detector is hardwired to the handlebars so I just unplug from there when I want to remove them.

I would say yes, I have Beetle Bags with Staintunes about the same diameter as the stock ones. As long as they are the same angle you should fine. If you some pics I can send you some for reference.

+1 +2 +5 8) +another +another, Also is this a plug and go setup or will we have to modify the wiring and headlamp socket. Do you have any install instructions or photos? Thank for putting this together

Thanks Northman, I'll re-use them, just was'nt sure and did'nt want to have a leaking fuel tank Thanks again, Ken

Manual says to replace washers for where the hose connects to the tank, basically its a banjo type fitting with crush washers, will it leak if I use the old washers? Thanks, Ken

Just got bid for in ground gunite pool 20 X 30 free form with 7 foot spa salt water system. $46,000 with no decking. I'm in So Cal, price will very. Be careful with who does the work, there are alot of shady pool contractors out there.

Ruhi, Thanks so much for all the info and keeping us updated. I too have an 02 and was shipped two different size bleeders. Is Spiegler/University Motors going to ship the correct bleeders ?

Just spoke with Gary at Univerity Motors, he has calls into Speigler with regards to Ruhi's and others problems. He assured me that he will do whatever it takes to make it right. I expressed concern to Gary that there seems to be an issue with fitment pertaining to proper lengh and what was the policy of returns and he again assures me he would do whatever it takes to make it right as he wants to keep customers for the long term. I told him I will request to return my kit after the smoke clears if Spiegler can't resolve the problems. He also asked if Dale has posted any info. Bottom line is it looks like we are waiting for resolution from Spiegler

I bought the same kit, but added 1.5 inches for the Heli bars. Have not installed them yet and not sure if I will after what Ruhi went through. Hopefully this is a isolated problem and Speigler will make it right.