tomek
Members-
Posts
11,334 -
Joined
-
Last visited
-
Days Won
21
Content Type
Profiles
Forums
Gallery
Events
Everything posted by tomek
-
BTW, I'm anti-hypochondriac, and on the top of that I avoid any healthcare facilities like plague. Why? Well, half of my family is a doctor or dentist, etc. So, I know those people. I would not put my health in their hands under any circumstances. 😉
-
The myth of exercise vs diet for weight loss
tomek replied to SwampNut's topic in Diet & health exchange
Sure, you can be thin by not eating, and no exercise, but the quality of life will suffer. Like not being able to enjoy verious in and outdoor activities/sports, so, what would be the point of it? Food eating times, festing, etc. and all other fads come and go all the time. Golden thing now, and then disproven in a year or two. Just follow your natural clock. I can't eat in first couple hours after firing up in the morning. Just coffee. Also, I don't eat after 5-6 pm because if I do qualify of sleep suffers. -
Dainese Kangaroo suit, and Sidi Vortice. Grass and dirt on the suit, but no tears from the impact. You get what you paid for. Cheap suits are one and done disposable affairs. Anyhow, so summarize, most painful off on my riding "carriere", there was shitload of pain right after, yesterday AM was just horrible as well. Waaaaaay better today. Talking bike to work. Winter skiing gloves, anything else won't fit. I do have cruise control, and linked brakes.
-
Nope, but probably happened when I flew over handle bars when front folded. My thumb was severely dislocated. Probobly got caught on handlebar. No dirt or grass on the gloves, so happened on departure. Thumb looked extremely funny. I kinda was thinking what to do with that (refused ride to hospital), laid down my hand on the table, thumb went back in place pretty much on its own. And duck tape happened to be just there. Should have taken a picture. Next time.😆 RS Taichi gloves. Top quality They look all good.
-
Went to see my doctor friend late am, he , of course, laughed. "You, and your race bikes" He looked, probably nothing broken, but to just make sure booked X-ray for me tomorrow. I have dog's body, any injuries, I recover extremely fast. What happened? just being impatient and, ultimately, stupid.😀 Putnam is one of those tracks on a grassfield, no reference points whatsoever. Pretty flat as well. So, when you are leaned over it is very difficult to see where the track goes, next turn, etc. There is white and red curbing but only at apexes, you can't see it ahead anyway. So, it was my first time there, very difficult to learn and memorize the track. Turns 1,2 and 3 are especially confusing. They de facto can be taken as a one turn. If you've ridden the track many enough times. Talked to couple guys who have ridden there many times, they all agreed with me, they just ride from memory. Anyway, I run off once, kept upright on slippery grass, second time I dumped it. End of the story. Very little purely cosmetic damage to the bike, but I took pretty big tumble in the grass at around 70-80 mph. Moral story? On track like Putnam, you gotta put enough laps before you can start pushing.
-
I'm actually ok other than above (getting XRayed tomorrow) and my upper body feels like had been run over by a tank or three.
-
-
-
Info gathered in 3D from The Man. Black Mamba. It was deteriorating track conditions due to ongoing construction. They are building new section that will connect old turns 3 and , I think 6. It will go on the inside of track, so trucks have to cross existing track. Lottsa dust (no grip) and cracked surface. It was not worth riding. Courius what new layout will be like. I loved the old section, well into 3 gear right, left and right. Full tilt, Without it North could be Mickey Mouse thing. We'll see.
-
There might be something else on the bike eating current. Also, you could pull fuses from anything not needed to run the engine, unplug headlight, etc. and test if symptoms disappear.
-
Because at that point alternator could make enough juice so it won't matter. Amperage is rpm dependent to some degree.
-
RR from 2004 Yamaha R1 fits in. Kinda. Gotta trim cooling fins with grinder. That's what I had on my XX. Voltage was rock solid IIRC around 14.0 Volts pretty much at all rpm, load or not. They can be found dirt cheap on eBay.
-
More load, more current injectors draw. Although I think ignition is first to suffer from low voltage. So, what you are feeling is most likely ignition cutting off.
-
Dude, you have no clue but yet insist on spreading confusion. Counterproductive, really.
-
Well, I've chosen credit +10% instead of straight refund to CC. Heading to Putnam this weekend. For some unexplained reason I have never been to that track. Watched some on oboard YTs, looks like fairly technical track, not much WOT or heavy braking. Pretty much seconds gear everywhere, 50-90 mph turns except for short 150ish mph straightway. Weather looks phenomenal for early October, chilly mornings but highs in low to mid 70's.
-
Also, it might be something as stupid as loose battery connections.
-
I'd say 12.35 V at idle is too low. It probably momentarily reads even lower when you get on gas (because injectors draw more current at load vs. light load), and before rpm hit your magic 3000 rpm mark. I don't have XX any longer but my FI Honda VFR 1200f reads around 13.8 at idle. Without engine running 12.35 V is pretty much discharged battery. What does it read without engine running? Ignition on, and ignition off? If I were you I'd hook up voltmeter the way it would allow you to read it while riding. Like get in 3 gear, and start accelerating at around 1500 rpm and see what it shows.
-
Well, I don't think it is fuel injector(s) issue. Fuel flow is metered by the length of their opening. Pressure in the rail stays more or less the same thru the rpm/load range. Referenced FPR can change the pressure it by some but the change is small vs. typical 3-4 bars in the rail. So, if injector is clogged it won't act like it does not flow at small load but flows OK at heavy. Carbs are different in that area because they have separate circuits, like idle system that controls, well, idle but also small throttle opening and light load is completely independent in operation from main jet, etc. So, in carbed bike if idle circuit is clogged engine will run like shit or won't run at all at low rpm and load/idle but can be perfectly fine at WOT. That's why I never suggested injector cleaning based on your symptoms. Also, it is simply impossible for them to get clogged at the same time, all of them. Always take care of simple and not time consuming things before getting deeper. Open air box as well, there could be mouse nest in it.😁 PC3 directly plugs in between bike ECU and injector leads, and alters duration of the signal or opening of injectors. PC2 would change input data to ECU to alter duration. Like it would tell outside temperature was lower and change the mixture that way. Either way, unplug it and see it is runs better.
-
oh, pc3? When troubleshooting you always should eliminate simple to check things first before digging deeper into it. KISS. Always. Saves time and aggravation. BTW, check grounds. Bad ground connections can be responsible weird voodoo shit. And that bike was sitting for awhile.
-
what am I thinking? Cover the basics first. don't overthink. It takes couple seconds to check voltage with engine running once the seat it off.
-
have you checked voltage at battery with motor running thru rpm range?
-
Weather today is absolutely perfect for track day. High in low 70's, sunny. I wasn't even gonna bother with setting up canopy. 😭 Sad.
-
FFFFUUUCCCKKKK. It blows. It might be it for the season. I was pretty amped up for this event, I mean last one for the season, so you can be much more aggressive because if you wipe out you have all fall, winter and spring to fix your bike/ heal your body. It blows. Really. Weather is nice, probably gonna paddle board tomorrow instead. Curious what happened. They are doing construction at The North Course, it'll be different configuration next year, and there was on going issue of water coming up thru cracks in the pavement when the sun was heating up the surface in the afternoons. That's what I hope. The other possibility is pretty grave, they were riding today.
-
So, it is referenced FPR. Vacuum leak will effect fuel pressure and consequently fuel to air ration.