The Krypt Keeper Posted January 12, 2015 Share Posted January 12, 2015 To prevent the fast blinking effect on the LED bulbs when converting over people would buy a plug and play from clearalternatives or put an inline diode into the wiring to prevent this... well its been a few yrs later and wondering if things have gotten easier? Saw this on Amazon, http://www.amazon.com/Signal-Flasher-Blinker-Motorcycle-Indicator/dp/B00CMO3V0S/ref=lh_ni_t?ie=UTF8&psc=1&smid=A1CSCZ8CRWX2GH simple effective relay Can you use this to solve it? little wiring not an issue just looking for clean easy install Looking to add some LED turn signals front and back as they are all 13yrs old with bulbs they came with. Quote Link to comment Share on other sites More sharing options...
TuffguyF4i Posted January 12, 2015 Share Posted January 12, 2015 The led relay is the way to go. Quote Link to comment Share on other sites More sharing options...
The Krypt Keeper Posted January 12, 2015 Author Share Posted January 12, 2015 The one I found on amazon the relay you're talking about correct? I tried to find clear alternatives and seems they are no longer.. Quote Link to comment Share on other sites More sharing options...
xrated Posted January 12, 2015 Share Posted January 12, 2015 Check these out.... I've used them in a couple different bikes over the years. The last one was for my FZ09. Install took about 2 minutes. http://www.customled.com/collections/electronic-led-flasher-relays#elfr1 1 Quote Link to comment Share on other sites More sharing options...
TuffguyF4i Posted January 12, 2015 Share Posted January 12, 2015 (edited) Yes. Look at the relay in the bike now and buy the same type. No need to keep the old relay and add a big resistor for no reason. Personally, I like the super quick flashing. More blinks = more attention. Edited January 12, 2015 by TuffguyF4i Quote Link to comment Share on other sites More sharing options...
JoWhee Posted January 13, 2015 Share Posted January 13, 2015 I can't remember where I got my relay, but it looks like the ones posted above. The problem I've noticed with the fast flashing is they don't seem to flash as brightly, don't go with inline resistors it's not worth the hassle. If you want more attention, hyperlites has some nice stuff. Quote Link to comment Share on other sites More sharing options...
jon haney Posted January 13, 2015 Share Posted January 13, 2015 Check these out.... I've used them in a couple different bikes over the years. The last one was for my FZ09. Install took about 2 minutes. http://www.customled.com/collections/electronic-led-flasher-relays#elfr1 This. The first one pictured on the left should be plug-n-play. Quote Link to comment Share on other sites More sharing options...
superhawk996 Posted January 14, 2015 Share Posted January 14, 2015 The problem I've noticed with the fast flashing is they don't seem to flash as brightly And it's illegal, the flash speed is dictated...and you look like a moron who can't/won't make his lights work properly. 1 Quote Link to comment Share on other sites More sharing options...
lexxus Posted January 20, 2015 Share Posted January 20, 2015 i used the ones from cyclegear, they plug and play. maybe theres a store near you. works fine. Quote Link to comment Share on other sites More sharing options...
.thumb.jpeg.dec210370aa05a849df0ec5aa9df0db3.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.