Guest Jetpilot5 Posted October 27, 2004 Share Posted October 27, 2004 I bought some turn signal stalks for a CBR600RR to put in place of the stockers on my XX. I liked the way it looked on DavesXX01's bike. Now, I have the signal off the bike, lens removed, reflector removed, and I can't figure out how to remove the stalk. Seems there should be another screw somewhere, but for the life of me, I can't find it. Does the stalk just pry off or is there some other secret? Thanks for the help. Quote Link to comment Share on other sites More sharing options...
Kbird Posted October 27, 2004 Share Posted October 27, 2004 Try this site, these are cut down stock rear turn signals http://home.att.net/~dos_equis/Blackbird/b...ail/signals.jpg Quote Link to comment Share on other sites More sharing options...
Redbird Posted October 27, 2004 Share Posted October 27, 2004 Are you talking about the stock signals? There's a little phillips head screw down in one of those holes- the one the wires come out of, I think. Get a #1 phillips and stick it in there and feel around. :grin: Quote Link to comment Share on other sites More sharing options...
tvking Posted October 27, 2004 Share Posted October 27, 2004 Look here. http://www.cbr1100xx.org/mods/tail/index.html Quote Link to comment Share on other sites More sharing options...
Guest Jetpilot5 Posted October 27, 2004 Share Posted October 27, 2004 Are you talking about the stock signals? There's a little phillips head screw down in one of those holes- the one the wires come out of, I think. Get a #1 phillips and stick it in there and feel around. :grin: That's it! Already got it back together. Sneaky little sucker. Thanks! :grin: Quote Link to comment Share on other sites More sharing options...
davesXX01 Posted October 27, 2004 Share Posted October 27, 2004 Hey, there is another screw in the hole where the wire comes out. Look at the new shorter one to see the location. I had to take mine half way apart before I could see it, put it together the same way. Once you do it you will laugh at how easy it is :grin: Quote Link to comment Share on other sites More sharing options...
davesXX01 Posted October 27, 2004 Share Posted October 27, 2004 Oops, guess I was to slow. Have fun! -Dave Quote Link to comment Share on other sites More sharing options...
Guest Jetpilot5 Posted October 28, 2004 Share Posted October 28, 2004 Yup, tail section is all back together. It looks great. A nice sanitary modification. Thanks for the help Dave. Quote Link to comment Share on other sites More sharing options...
xrated Posted October 28, 2004 Share Posted October 28, 2004 Or....you could do this: Quote Link to comment Share on other sites More sharing options...
Stealth Posted October 28, 2004 Share Posted October 28, 2004 Does this also work on the Eropean Model? With the diamond shaped indicators? Quote Link to comment Share on other sites More sharing options...
matey_peeps Posted January 3, 2005 Share Posted January 3, 2005 Try this site, these are cut down stock rear turn signalshttp://home.att.net/~dos_equis/Blackbird/bobtail/signals.jpg To whoever did this writeup: good on ya mate. bloody brilliant. Too many people were bitching about my tiny rear signals and once I removed the stalk, I couldn't figure out how to re-mount em. :wink: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.