Jump to content
CBR1100XX.org Forum

Jetfixxr

Members
  • Posts

    178
  • Joined

  • Last visited

Reputation

0 Neutral

About Jetfixxr

  • Birthday 07/27/1964

Contact Methods

  • AIM
    Selcal1
  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Gender
    Male
  • Location
    Cape Canaveral, Fl.
  • Interests
    Airplanes, Turbo Supras, motorsports involving high performance engines.
  1. Jetfixxr

    Seat

    The custom look is very nice, thanks guys for the suggestions. Jet
  2. Jetfixxr

    Seat

    I am so effing pissed, I mean royally, I was in my garage moving some crap around, my factory seat was on the bench minding it's own ass, my custom seat on the bike. Well something fell and poked a hole in my factory seat and I am looking for advise on a fix, or how to approach this shitty little issue... Thanks folks Jet
  3. Its pointless for us in that the thermal exchange of the exhaust header is sufficient enough that Honda engineering did not require the manifold be wrapped or any other type of barrier to keep the heat in the assembly for emission or otherwise. Wrapping an exhaust is generally done when the engine and pipes don't get hot enough and subsequently you end up with moisture under the wrap resulting in rust to the pipe in places that you wish it hadn't. If you listen to our bikes idle it's an off beat non consistent "I just want to YELL!!" tone. Our engines were for the most part a racing engine. However check this out... http://www.centuryperformance.com/exhaust-header-heat-wraps-do-not-use.html So, in light of this. I say pointless for us to do. Jet Now if you really want to improve the manifold, send it out and have it ceramic coated. Jet
  4. Check it my 97 the upper is low beam and bottom is high beam.
  5. what year is your bike? 1997
  6. Anyone out there put LED's in the cluster?? Jet
  7. Is that the output over the entire rev range, or at idle?? Make a measurement from idle all the way up to 6k or more, tell us what it does. If you can blow two bulbs in 15 minutes, it is hard to believe that your RR is working properly. Failure to regulate can be caused by the RR being bad, or by a poor connection. It will transition from 13.8 to 14.03 from idle to 6k I am going to swap in a R/R and see what it does, i have a spare but it will really piss me off that the RR is bad. Jet.
  8. Now i put a pair of plain old phillips H7's in and they lasted 15 minutes, so here we go....last thing that changed on the bike before I started having issues was the battery, so back to S1, new battery, new headlights then we will see. I sure hope the RR is not bad.. Jet
  9. That's what i am going to install next. Just 2 plain jane h7 bulbs. Jet
  10. Jetfixxr

    Headlights

    Guys, i am stumped, i have even replaced the little connectors behind the light between the harness and the bulb. i am Effing stumped. My output with the engine running is 14.03 battery charged and i don't know what else 21k on the bike, the headlight relay is working. Any ideas??? Jet..
  11. I had a Zero G touring on mine but still got blasted, i just put a cheap bubble on it to try out but i think i will end up with a Vairo Touring. Jet
×
×
  • Create New...

Important Information

Terms of Use