Jump to content
CBR1100XX.org Forum

blackhawkxx

Members
  • Posts

    25,231
  • Joined

  • Last visited

  • Days Won

    129

Everything posted by blackhawkxx

  1. If you want to be careful, bring the piston to the top for each cylinder that you are working on.
  2. If it was in a Mustang, it should have had a roller cam which is a different beast.
  3. I would just fire it up and ride.
  4. I don't know why people would even look at it. If I wanted it, I would just come and get it because I know that it is as good or better than new.
  5. That is one good looking bike.
  6. I use Marine Sta-Bil stabilizer that says it takes care of the ethanol. http://www.wholesalemarine.com/sta-bil-marine-ethanol-formula-81821.html?gclid=CMHpx9jl-r0CFaMcOgod1FsAsw
  7. Is this one of the reasons that you are selling off? Best of luck with your back.
  8. The only thing that I would add is you might be surprised at the cost of decking screws over dry wall ones. And once you use a nail gun, you will never look at a hammer the same way.
  9. Got to say, your fuel tank shouldn't have a fuel pump if it is a 97.
  10. I have been wanting to pick up a spare 97 header but do not want any dents. That is why I have replaced them. Tell me about the freezer trick.
  11. Or you could buy a 97-98, they run cooler.
  12. It's still snowing up this way. Once it warms up, people get the bike fever and want one. Wait it out before thinking it will not sell.
  13. I'll be interested to see how many years you guys get from them.
  14. Glocks are always in demand. Research their worth.
×
×
  • Create New...

Important Information

Terms of Use