cbrtaz64 Posted December 8, 2011 Share Posted December 8, 2011 looking for the mounting hardware for a 98 BB center stand.. i got the center stand with the bike but it was not on it.. not sure what type bolts to use or spring.. if anyone has this stuff or can provide sizes and info it would be appreciated.. Quote Link to comment Share on other sites More sharing options...
jon haney Posted December 8, 2011 Share Posted December 8, 2011 I think they are 10mm thread, about 1.5" long and take a 14mm wrench. Not sure about thread pitch, but I can take a look when I get home tonight. However, I'm sure someone else will have all the info posted here before 5:30. Quote Link to comment Share on other sites More sharing options...
cbrtaz64 Posted December 8, 2011 Author Share Posted December 8, 2011 thank you for the reply.. so i appears i might just need a 10mm nut and bolt.. was not sure if they had to be anything special.. Quote Link to comment Share on other sites More sharing options...
Furbird Posted December 8, 2011 Share Posted December 8, 2011 I think the frame is threaded, no nuts required (have fun with that one). As far as the springs go, I bought a couple from the hardware store for the one I added to the dragbike. Quote Link to comment Share on other sites More sharing options...
Peepa Posted December 8, 2011 Share Posted December 8, 2011 I dont know the year they changed but there is a diference between mounting hardware on the centerstand. I believe the early ones use a long bolt that went all the way thru and the later years used two bolts. Quote Link to comment Share on other sites More sharing options...
John01XX Posted December 9, 2011 Share Posted December 9, 2011 Parts Breakdown at www.HDLParts.com Shown under "Stand" on the break down HERE Quote Link to comment Share on other sites More sharing options...
muff9588 Posted December 10, 2011 Share Posted December 10, 2011 Parts Breakdown at www.HDLParts.com Shown under "Stand" on the break down HERE Great site, thanks for sharing John. My bird parts arrived a few days ago, thank you! -Kyle Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.