Zero Knievel Posted November 5, 2009 Share Posted November 5, 2009 I got my HEL lines today. I ordered the brake kit and the clutch line. Sadly, whoever put the package together did a sloppy job. While it was sealed, parts went everywhere because nothing stayed closed up. There is no packing list, so I need confirmation on what should have been shipped. I have the following accounted for: 1 - Line marked "clutch" 1 - Line marked "A" 1 - Line marked "B" 6 - Lines of various sizes and configurations 3 - Bolts, long 12 - Bolts, short 33 - Washers, copper I am concerned as I believe the brake system on an XX (based on HEL's own website) said there were 10/11 lines for the brakes and 1 for the clutch. I have a total of 9 lines in this kit which leaves 1-3 unaccounted for. I'm e-mailing HEL to see what's up. Quote Link to comment Share on other sites More sharing options...
blackhawkxx Posted November 5, 2009 Share Posted November 5, 2009 I would contact HEL and ask them to be sure. Quote Link to comment Share on other sites More sharing options...
Warp11XX Posted November 5, 2009 Share Posted November 5, 2009 I got my HEL lines today. I ordered the brake kit and the clutch line. Sadly, whoever put the package together did a sloppy job. While it was sealed, parts went everywhere because nothing stayed closed up. There is no packing list, so I need confirmation on what should have been shipped. I have the following accounted for: 1 - Line marked "clutch" 1 - Line marked "A" 1 - Line marked "B" 6 - Lines of various sizes and configurations 3 - Bolts, long 12 - Bolts, short 33 - Washers, copper I am concerned as I believe the brake system on an XX (based on HEL's own website) said there were 10/11 lines for the brakes and 1 for the clutch. I have a total of 9 lines in this kit which leaves 1-3 unaccounted for. I'm e-mailing HEL to see what's up. IIRC I had 10 lines including clutch in my kit. I ordered mine for the '03 model. I can inspect this evening if you like...??? Quote Link to comment Share on other sites More sharing options...
Zero Knievel Posted November 6, 2009 Author Share Posted November 6, 2009 They sent me a photo and description. All the parts match. They count lines literally. So if one assembly has two lines going from hard point to hard point, they count each of them. I was expecting 11 lines (10 brake - 1 clutch). I got 9 (8 brake - 1 clutch). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.