xxexcess Posted March 31, 2009 Share Posted March 31, 2009 My 96 XX has carbon oval yoshi rs3's on it, now the problem is that on both exhuasts there is/was in the centre a metal pipe this has snapped off and is now floating around inside the can. I can't pull it out because the end is flared and the pipe is straight and also has to go out of the tip of the exhaust which is at an angle. What to do with these??? they make an annoying metallic tingling sound at certain rpm's / gears, if i can get them out what will happen to the can's other than being loud (they are now) i can't think that these bit's of pipe are actually doing anything now. Thanks Iain Quote Link to comment Share on other sites More sharing options...
blackhawkxx Posted March 31, 2009 Share Posted March 31, 2009 I have the Yosh's but not the carbon ones. Mine has screws around the end that if removed, the end cap should come off. I don't know if yours is that way or not. Quote Link to comment Share on other sites More sharing options...
xxexcess Posted March 31, 2009 Author Share Posted March 31, 2009 it's riveted but thats no big problem, looking down them with a torch earlier today looks like one of pipes/baffles is in about 2 or 3 pieces so re packing isn't going to help that one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.