rockmeupto125 Posted February 15, 2009 Share Posted February 15, 2009 Does anyone have a swingarm tool? I'd like to get the correct measurement so I can build a proper one. Most important is the distance of the of the hole for the torque wrench drive from center. Thanks. Quote Link to comment Share on other sites More sharing options...
partsman Posted February 15, 2009 Share Posted February 15, 2009 I made one with a dremel and a cheap socket. Quote Link to comment Share on other sites More sharing options...
Redbird Posted February 15, 2009 Share Posted February 15, 2009 Joe, I've got one. It's been modded a bit to work on an SV1000, so I can't get you specs on the castling, but ID. OD, and the dimension you mentioned, no problem. Stay tuned.... Quote Link to comment Share on other sites More sharing options...
Redbird Posted February 15, 2009 Share Posted February 15, 2009 48.5mm center to center. Quote Link to comment Share on other sites More sharing options...
KCBIRD Posted February 18, 2009 Share Posted February 18, 2009 Hey Joe, I've got one. I made one from an old socket to take my swingarm off, but decided to buy the correct one to torque it properly when I reassembled it. I can send you some pics with measurements if you want. Quote Link to comment Share on other sites More sharing options...
rockmeupto125 Posted February 18, 2009 Author Share Posted February 18, 2009 That's precisely why I wanted the measurement...so I could properly torque these instead of "yeah, that's about right." I know wht it looks like, just wanted to locate the drive hole the correct distance from center. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.