JDxx Posted June 30, 2008 Share Posted June 30, 2008 I got a used RS-3 header off ebay and would like to find a mid pipe for it. So if anybody has one laying around pm me I appreciate it. ThanXX, JDXX Quote Link to comment Share on other sites More sharing options...
JDxx Posted July 1, 2008 Author Share Posted July 1, 2008 .....................................Still need it, or maybe I'll sell the header. Anyone????? ThanXX, JDXX Quote Link to comment Share on other sites More sharing options...
TOXXIC Posted July 1, 2008 Share Posted July 1, 2008 Did you buy the header out of Puyallup WA for about $180? Do you know what the measurement is where the header exits and meets the midpipe? Quote Link to comment Share on other sites More sharing options...
CxBXR Posted July 1, 2008 Share Posted July 1, 2008 Go to muffler shop, have them bend you a piece to fit, it will be cheap....... Although you might not be able to get it in $$ ? Quote Link to comment Share on other sites More sharing options...
rossodave Posted July 1, 2008 Share Posted July 1, 2008 The midpipe and muffler are one piece on the RS-3. Quote Link to comment Share on other sites More sharing options...
JDxx Posted July 1, 2008 Author Share Posted July 1, 2008 Thanks for the replies. Yeah TOXXIC I did get it from there. Was I bidding against you? I didnt know that the muffler/mid pipe were one piece. I have access to a yoshi tri oval I plan to use. The outlet of the header is 2.25" outside diameter. I thought about having one made at a muffler shop, sounds like the way to go. Now I just gotta find some SS tubing. ThanXXs again, JDXX Quote Link to comment Share on other sites More sharing options...
TOXXIC Posted July 2, 2008 Share Posted July 2, 2008 Nope, I didn't bid, just watched the auction. Some day I plan on doing a 4-into-1, Mig hi mount. Quote Link to comment Share on other sites More sharing options...
tomek Posted July 2, 2008 Share Posted July 2, 2008 It depends,on rs-3 Race it is separate piece with springs etc,on rs3 Zyclone it is one piece with clamp,etc Quote Link to comment Share on other sites More sharing options...
JDxx Posted July 2, 2008 Author Share Posted July 2, 2008 Yeah I think Im just going to have to do a custom job. Shouldnt be too hard being as I used to run a muffler shop back in the day. Now I just need to find a shop to do the bends. I was just hopeing sombody here would have something that would work. JDXX Quote Link to comment Share on other sites More sharing options...
kiwimack Posted July 2, 2008 Share Posted July 2, 2008 I got a used RS-3 header off ebay and would like to find a mid pipe for it. So if anybody has one laying around pm me I appreciate it. ThanXX, JDXX I had the same problem a couple of years ago . I went to Yoshimura. don't remember the price. clicky Quote Link to comment Share on other sites More sharing options...
TexasDawg Posted July 2, 2008 Share Posted July 2, 2008 I got one for a RS3 race system, the system with the seperate mid-pipe. I replaced mine when I went to a custom high-mount. PM me with an offer,,, later Quote Link to comment Share on other sites More sharing options...
JDxx Posted July 13, 2008 Author Share Posted July 13, 2008 Well I got it all together now. I would like to thank a455goat off ebay for the header My local buddy Davey Sprocket for the yoshi TRS muffler TexasDawg from right here for the mid-pipe and myself for putting it all together even the 1.69$ simpson Lsta21 strap and napa cork gasket I made the exhaust hanger out off will swap it out later when I can find a real hanger. This bike sounds absolutly awsume now, accelerates smoother (due to a loss of bottom end I belive) and screams harder than ever over 7000. Thanks again, JDXX Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.