TJ1137 Posted June 6, 2008 Share Posted June 6, 2008 I was wondering if anyone has successfully used an electronic flasher in their BB. I have a 99 with an integrated taillight. It has a fast blink rate, so I bought one of these relays. It works fine for about 30-60 seconds then it gets warm and stops working. They also sent me a heavy duty one which has 3 wires instead of 2. It doesn't work at all. Both are said to be plug and play for the XX. Has anyone had this problem or know of a relay that worked?? Update: The heavy duty relay they sent me causes the tun signal fuse to blow. Quote Link to comment Share on other sites More sharing options...
gt_mule Posted June 6, 2008 Share Posted June 6, 2008 I've used the ELFR-1 with no problems. http://www.customled.com/PRODUCTS/FLASHER_...asher_relay.htm Quote Link to comment Share on other sites More sharing options...
TFT Posted June 6, 2008 Share Posted June 6, 2008 I purchased the flasher from Clear Alternatives. It works great!! Only $12.95 Give them a call. You have to disconnect 1 wire, I'm not sure whcih, that is why I suggest you call them. http://clearalternatives.com/Merchant2/mer...ry_Code=Flasher Installation instructions http://www.clearalternatives.com/flasher.htm Quote Link to comment Share on other sites More sharing options...
CxBXR Posted June 6, 2008 Share Posted June 6, 2008 I've used the ELFR-1 with no problems. http://www.customled.com/PRODUCTS/FLASHER_...asher_relay.htm +1 plug & play no splicing I have this one, & run both led's (for the rear) & filament (for the front) worked great Quote Link to comment Share on other sites More sharing options...
TJ1137 Posted June 6, 2008 Author Share Posted June 6, 2008 Ok. Thanks guys. I'll give them a buzz. Quote Link to comment Share on other sites More sharing options...
blackhawkxx Posted June 7, 2008 Share Posted June 7, 2008 I have a 99 with an integrated taillight. It has a fast blink rate I had mini turn signals on the rear. When I put the integrated taillight on my 97, it blinked too fast. So I hooked up the inter. and the mini turn signals together and it worked right and with both the taillight and mini's blinking, you can see it a lot better. Quote Link to comment Share on other sites More sharing options...
TJ1137 Posted June 7, 2008 Author Share Posted June 7, 2008 Yea, that'd work. The minis will balance the load so it'll blink normal. Quote Link to comment Share on other sites More sharing options...
CxBXR Posted June 8, 2008 Share Posted June 8, 2008 Were those minis LED's or filament type ? Quote Link to comment Share on other sites More sharing options...
blackhawkxx Posted June 8, 2008 Share Posted June 8, 2008 filament type. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.