K-DOGG Posted December 23, 2004 Share Posted December 23, 2004 I DONT KNOW IF ANYONE HAS SEEN THE LATEST ISSUE OF STREETFIGHTERS,BUT THEY HAVE A TRICKED-OUT 1200XX.ONE OF THE MODES IS UPSIDE DOWN FRONT FORKS FROM THE HONDA SP1.DOES ANYONE KNOW IF ANYBODY SELLS UPSIDE DOWN FORKS FOR THE BLACKBIRD.I KNOW THEY HAVE AFTERMARKET SHOCKS FOR THE REAR,BUT HAVN'T SEEN ANYTHING OUT THEIR IN FRONT FORKS.THANKS! Quote Link to comment Share on other sites More sharing options...
Northman Posted December 23, 2004 Share Posted December 23, 2004 TSR and Majical both sell kits to install the RC51 (SP1) forks on the XX Huge money, but big bling factor, that's for sure. Oh, and your "caps lock" button is stuck. :roll: Quote Link to comment Share on other sites More sharing options...
K-DOGG Posted December 24, 2004 Author Share Posted December 24, 2004 THANKS FOR THE INFO. AS FAR AS THE CAP LOCK,IAM LAZY. Quote Link to comment Share on other sites More sharing options...
rickrad Posted December 25, 2004 Share Posted December 25, 2004 THANKS FOR THE INFO. AS FAR AS THE CAP LOCK,IAM LAZY. And in forum land it seems you are yelling at everyone and that just not nice. You need a Dirty Sanchez. Quote Link to comment Share on other sites More sharing options...
FlaminWarrior Posted December 28, 2004 Share Posted December 28, 2004 Do a search on here.... http://www.superblackbird.co.uk/ ...Pete has them as a conversion set, JAWS prob does too.... :wink: Quote Link to comment Share on other sites More sharing options...
AlphaBird Posted December 29, 2004 Share Posted December 29, 2004 You could always put 1000RR forks/front end on it--better yet Ohlins they should be long enough--I actually have a extra set of Ohlins 929 forks, and stock 1000RR forks--prolly too short though--too bad I am so lazy these days Quote Link to comment Share on other sites More sharing options...
bunny Posted January 5, 2005 Share Posted January 5, 2005 What r the spare parts i need to change in order to fit in the SP1 front fork? E.g, triple clamp? Quote Link to comment Share on other sites More sharing options...
Helvet Posted January 5, 2005 Share Posted January 5, 2005 Also Hyperpro and WP have a (expensive) set..... Quote Link to comment Share on other sites More sharing options...
demon Posted January 5, 2005 Share Posted January 5, 2005 You'd need the front wheel and brake rotors and calipers off the bike, as well as the fender and upper and lower tripples. The clipons and front brake master cylinder and brake lines. Pretty pricey for some bling. Quote Link to comment Share on other sites More sharing options...
bunny Posted January 6, 2005 Share Posted January 6, 2005 Wow...so many parts to go along wif... Tat means the fork can fit in nicely wifout altering any parts? Quote Link to comment Share on other sites More sharing options...
Helvet Posted January 6, 2005 Share Posted January 6, 2005 No, it means you have to change al these parts, or customize them to make it fit.... Most things are possible to fit, just the yokes (tripples) will not be customized. You do need new ones, because there is not enough metal left to make the holes for the forks (a lot) bigger. Quote Link to comment Share on other sites More sharing options...
bunny Posted January 6, 2005 Share Posted January 6, 2005 :shock: so many parts to go along wif... wonder how much it cost to fix up the whole fork... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.