Jump to content
CBR1100XX.org Forum

Canada0937

Members
  • Posts

    161
  • Joined

  • Last visited

Reputation

0 Neutral

Profile Information

  • Location
    Alberta, Canada
  1. There's a useful comment. :icon_clap:
  2. I've asked that question many times. Unfortunately, everyone I ask gives me a different answer. One of the things I've kind of discovered though is the tire says "max pressure at max load" So that means if your vehicle is fully loaded, you increase the PSI. That's what I do with my truck. Otherwise, my PSI is set somewhere between the door jam and max tire pressure. If anyone else has an answer, I'd love to hear it.
  3. Canada0937

    Blue 99

    I have a blue '99
  4. Good to go...had more patience today and managed to drill out the bolt....put the thermostat back in and we were back in business! Now, got to wait for the warm weather again.
  5. If you're referring to the fan behind the radiator...yes..I hear it.
  6. Right! On the highway or while I'm moving, the bike is perfect...as many of you are encountering, when we're in stop and go traffic, it's an issue. With my bike though, I don't think I should see the upper quarter of the temp gauge until mid summer. Right now, it's only 47 degrees out and on the first stop light, I'm almost into the red zone on the temp gauge. It might just be a faulty sensor...since the bike has never over heated AND since the temp gauge is 'normal' when I'm moving, I don't think it's the radiator...yes some of my fins are bent and I've spent many hours straightening as many as I could...any other ideas?
  7. Okay, now I need an explanation as to how it all works. My thought was that the thermostat would stay closed until the engine got to operating temps, then it would open, allowing the coolant/antifreeze to circulate through the system, thus keeping it at a constant 'ideal' temp. - not too hot, not too cold. By me removing the thermostat, the coolant would flow through immediately....keeping the engine temp cooler, earlier. If I'm wrong, please let me know. I'm fairly new to DIY. I just didn't want to spend another $1300 to my shop's service department and have them not fix the problem again.
  8. Took out the thermostat to see if it would run a little cooler this season...the bike is a 99 and I have had heat issues since the beginning...nothing serious...just want it to run a little cooler. I tried that thread, but after the day I had, I didn't have the patience to sift through it. Found it! Thanks for the link!
  9. Okay guys, what started off as a quick 20 min. oil change has turned into a bbbbbbiiiiigggg mess. Instead of just an oil change, I also did a coolant flush and refill AND change my air filter AND took out my thermostat. That's where the problem is...I over torqued a bolt in the thermostat housing cover and it's fucked...I've tried drilling it out and it's not moving...SO, I need to find the part numbers for the thermostat housing and cover please....as well as if there is a gasket between the housing and cover. I know there is a gasket between the housing and engine, so if you could please get me the part number for the gasket as well, I'd appreciate it. Thanks.
  10. underneath my bike in the garage. There's a foot of snow on the ground and won't be riding any time soon. My question is: What should I be worried about? I figure the 50/50 water/antifreeze mixture had too much water in it. My hope is that the solution just came out the overflow tank and didn't rupture any of the lines. In the spring, what should I be looking for? Do I do anything now? Any help would be appreciated.
  11. I don't feel any vibes on my GF&L. Let me go for a quick ride to check...BRB!
  12. If you were in Fort McMurray, Alberta, Canada today I'd tell you the answer was easy...the temperature. It's -40 degrees Celsius today. For you Americans that's -40 Fahrenheit as well. The only number on the 2 scales that are the same! No riding today!
  13. I've used the passenger peg, but it is more of a strain on my back. Other suggestions other than taking off the seat would be appreciated.
  14. The pics are great! All you should need is one hand on the grab rail in the tail vent, if done correctly. Notice there isn't a rail on the right side of the bike.
  15. John, You don't have the Vista Cruise advertised on your website. What else ya got?
×
×
  • Create New...

Important Information

Terms of Use