JoWhee

It must be one of those limited edition 5 speeds.

Sold... From now on I'll have to mention the hello kitty tape.

Still for sale. I'll even seal the box with some hello kitty duct tape for the lucky purchaser.

Mikey, as said above, you should be able to get at the bulb, from between the forks and headlight. IIRC there is a rubber boot then you can access the bulb. Yes there will be much swearing Virginia. +1 on the no touchy of the bulb. While. You're doing the maintenance get yourself a ziplock bag, put your insurance and reg into it, and tape it to the underside of your seat. PS I like your new avatar.

Run it to a sink?

Condensate pump? http://www.amazon.ca/s/?ie=UTF8&keywords=condensate+pump&tag=googcana-20&index=aps&hvadid=37561330062&hvpos=1t1&hvexid=&hvnetw=g&hvrand=17415332087648384505&hvpone=&hvptwo=&hvqmt=e&hvdev=t&ref=pd_sl_6knesgq9m4_e

Please tell me you came to your senses and decided to keep it!

Mike has first dibs, I'll get you a shipping quote early next week.

I've got this old Corbin gunfighter & lady seat with a backrest. I'm at least the 4th owner of this thing. It's seen more ass than Gene Simmons Condition is 3/10 and that's being generous. Asking $100 US plus shipping, from Canada. I may be able to bring it stateside and ship it from there if you're not in a hurry.

I'd like to trade my blue givi bags E460 Side bags and a corbin smuggler for a black 3 bag setup with a backrest on the top case. The Corbin is blue, but is a little scratched, it has been plasti-dipped black, condition is 7/10. The givi bags are monokey E460 if I'm not mistaken, a few scratches and chips, condition is 7/10 I have more pictures if there's any interest.

If you need a box I have a few...too bad that big one got wet!

We're still taking about the givi right?

We found the problem, it was pregnant with twins.

Geez I could have sold you a brand new 60000btu furnace cheap! I could probably have trailered it down this weekend, God knows I'm bringing everything but the kitchen sink to philly!

Just fix the damned air infiltration, duct insulation may solve your condensation problem, or it could make it worse, i.e. mould growing in the insulation. It will also lower your energy bill by having no infiltration.

I'll bring my tools on Friday if you don't get it sorted by then.

I don't know where you live but I'm assuming NY or New England. Condensation means high humidity, and a cold surface. Fix one or both and the problem goes away. If you don't fix this you'll get some nasty problems like mould. If you're running a gas furnace it won't do much for dehumidifying because newer systems don't use your breathable air for combustion, they normally have their own air supply. Wood stoves draw air from your house for combustion, they also burn hotter, both of which will lower humidity, unless of course they are pulling cold outdoor air in through your ducts. Have you thought about an HRV? It should solve your problem. It would draw in cool dry air, and heat it via an heat exchanger, and also filter the air while its at it. It can also be hooked up to your existing duct work. They aren't noisy, and they require minimal maintenance.

No kidding I've already had people asking. But I REALLY like the Corbin's. But the little woman doesn't know the meaning of packing light.

Tempting. I'm thinking about ditching the Corbin's in favour of a give setup.

Now you tell me! I'm having some come over from the UK :/

I agree with Zero, uh..Sylvia. Find some OEM ones on eBay then bob them. You could also get some wingrack signals, they aren't cheap. If you find some at a decent price let me know. http://www.ebay.com/itm/GIVI-COMPLETE-INDICATOR-TURN-SIGNAL-FOR-THE-WINGRACK-WING-RACK-RIGHT-HAND-/400576259457

My '00 does the same thing, I'm just too lazy (busy) to open it up and clean it.

Maybe I should have asked where it was worn.... On which body part?

Dave I'll take it. Damnit! There goes the budget jowhee @ gmail Ps I'll have it shipped stateside.

... or some mad genius to fabricate some XX body work for it.