Jump to content
CBR1100XX.org Forum

SR71BLACKBIRDXX

Members
  • Posts

    4,417
  • Joined

  • Last visited

  • Days Won

    6

Everything posted by SR71BLACKBIRDXX

  1. One just came in. Dvd confirmed working, but don't have a vhs here to test. No remote. Still need one?
  2. I get these all the time, but I can't guarantee one by Christmas. I'll keep my eyes peeled
  3. I'd tell you that your engine case is cupped..... But I'm sure you don't want to hear it
  4. No stains? Can't be leaking that bad.Id say fuck it. Watch fluid. If you start seeing wet spots, consider replacement. $800 doesn't seem crazy. I'd say AT LEAST $400 if you did it yourself. Needs an alignment afterwards, PS fluid, and a shitload of your time.
  5. Boom! Thanks again Ben, and thank your dad for me as well. It was good to see you guys.
  6. I'm gonna take a shot at this... Assuming you're running the stock 530 chain, the correct diameter of the stock 17 tooth sprocket is around 3.4". An 18 tooth sprocket would be around 3.6", a difference of .200". However you would have to halve that because the chain is working on the radius of the sprocket. So were down to .100". However, the chain operates on the root radius of the sprocket, so that number may be off a little. However .100" assumes you have the chain adjusted exactly the same for both applications. A loose chain with the stock sprocket may have the same wheelbase as a tight chain with the bigger sprocket. I wouldn't worry too much about it
  7. SR71BLACKBIRDXX

    XX Q

    Hairspray works the best for grips. Throw the grip glue in the trash. I was going to suggest just getting new cush drive rubbers. Changed them on my VFR for like $40, and install was pie. Don't have a clue about hid.
  8. If it can wait week or so, the old lady is getting a new phone to replace her Note 2.
  9. God damn it..why did I click on this? Stainless or blued. Dies? What else you have?
  10. Hard to believe that melon of yours is a large.
  11. You got it buddy. It's updated to Lollipop and should be just fine. I formatted the sd card, but you might want to make sure before you hand it over to one of your kids. I had some..um.."dicey" pics in there. Enjoy
  12. 3 minutes! Dave couldn't sell stuff that fast. His merchandise sucks
  13. Thought I'd post it up here before Egay. Looks like they go for $150-$200 . I'll sell it for $100 here. Free shipping. Have charger, earphones, 16 gig sd card, and a Seidio active case with holster. Screen is mint. (Which by the way is a testement to Gorilla Glass. 2 years, never had a screen protector, and is still prefect) It's been factory reset and the sd card had been formatted.
  14. I figured the drinking thread would hold the record. Not even close!
  15. Good advice here. It's a straight forward job. +1 on Motocraft plugs If your NOT replacing the wires then +2 on the boot tool. You'll most likely fubar the boots/wires if you try to pull them off by hand. If your putting new wires on, then yank away!
  16. Sorry, not putting hid in a baby blue Hyundai mommy mobile.
  17. I've written down the date for the last one I put in. She is no longer using her DRLs. We'll see if they last any longer
  18. Sad. Another one bites the dust. Buddy got $4200 for it. By far, the cleanest XX I've ever seen.
  19. No to silverstar. I've used them in the past, and your right. They are brighter, but burn out faster. I checked with her last night, and her OCD confirms that I've changed all 4 at least once, and a couple of them twice. Strange. This is the first time I've had any experience with H7 bulbs. They are held in place similar to our bikes. (That little piece of wire you push in and move to the side) I thought it was a bad way to hold them, but I don't remember changing out bulbs on any of my XX's or VFR's.
×
×
  • Create New...

Important Information

Terms of Use