Jump to content
CBR1100XX.org Forum

Erratic Ignition Problem---Resolved


AlphaBird

Recommended Posts

A while ago, I was experiencing a on-off issues with the ignition, back firing and generally running like it was fuel starved---WRONG--

THe rubber band that holds the ECU mounted above the tail light broke---sos the ECU was bouncing around whilst going over bumps causing the abherent behavior---fixed the rubber band all is well now---go figure---my only two issuses with that bike are ass-related

1) the seat latch fell off

2) the ECU rubber band broke---go figure

PS--I think Im keeping the bike---its just too much fun two-up :lol::lol:

Link to comment
Share on other sites

Seems odd that even while being bouncing it got intermitant being solid state electronics and all. I would check your pins and connection in the plug.

Unless the bank angle sensor is in there and the rattleing caused it to cut out sporadically.

Link to comment
Share on other sites

Keep in mind he's also PCIII equipped, so that connector is bouncing around as well.......

Nahhhh-that wasnt attached to the ECU, and it was the primary suspect, I actually found the problem when I tried to velcro FOUND the problem whenst I was trying to velcro the PC3 to the ECU--, I was concerned that there was a broken wire or connector--but once I secured the ECU down all was good--sos I am thinking that maybe a connector was getting over bounced some how---regardless its all good now---

So id anyone has a funy problem like this ---check the really simple stuff first--ie the rubber bands---go figure :roll: :roll:

Link to comment
Share on other sites

1) the seat latch fell off

I had the same exact problem. Made me have to bungee it until the new one arrived.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Terms of Use