Jump to content
CBR1100XX.org Forum

speedohealer connection


blackbd1

Recommended Posts

If the '00 is the same as the '03, then the plug-in is on the left side under the gas tank just above the gearbox in a bell-shaped rubber cover that houses electrical connectors and is suspended on the wiring harness zip-tied to the left frame. Remove the two rear tank bolts and shim the rear of the tank up three inches or so. You can then see/access from either side with a light. Download the speedohealer user's manual to calibrate it.

Link to comment
Share on other sites

$10 cheaper than the one I posted in the other thread which is plug-and-play for the 'XX.

They are pretty similar in design.

-Pace

p.s Make sure you locate the correct 3-wire connector. There are at least three inside that rubber harness. You're looking for a neutral-colored connector with green, pink, and black wires.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Terms of Use