vincer Posted April 7, 2015 Share Posted April 7, 2015 Did a valve check, cleaned both surfaces and used a minimal amount sealant on the cover with a new gasket. Leaks at the circular head cut outs. I should've read my manual. It says to use sealant in that area. How much is needed? Just a smear or an actual bead? Quote Link to comment Share on other sites More sharing options...
Zero Knievel Posted April 7, 2015 Share Posted April 7, 2015 (edited) The oil's not under pressure. A light coating should do it. The pain is making sure they are in place. Groove everywhere else but smooth as a baby's bottom in 4 spots. Edited April 7, 2015 by zer0netgain 1 Quote Link to comment Share on other sites More sharing options...
CBR-RR-XX-CESS Posted April 7, 2015 Share Posted April 7, 2015 Mileage? And how did the valves clearance check out? Quote Link to comment Share on other sites More sharing options...
vincer Posted April 8, 2015 Author Share Posted April 8, 2015 43,000 miles. Someone had been in there before me. Everything in spec. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.