racer212 Posted December 3, 2012 Share Posted December 3, 2012 I bought JB4XX's Blackbird which has what I think are Buell pegs on it, to lower and move the pegs from stock. I want to get another set for a different project - what exactly would these pegs come from, year/model wise? Quote Link to comment Share on other sites More sharing options...
HANKSXXX Posted December 3, 2012 Share Posted December 3, 2012 Buell pn: N0006.1AD Footpeg kit, Rider, XB I think they cost $37.50. I had bushings made locally for 8mm pins. I found the pegs on Ebay from a Buell dealer in Wisconson Got a new set with bushings here if you can't find them. Hank Quote Link to comment Share on other sites More sharing options...
racer212 Posted December 3, 2012 Author Share Posted December 3, 2012 Buell pn: N0006.1AD Footpeg kit, Rider, XB I think they cost $37.50. I had bushings made locally for 8mm pins. I found the pegs on Ebay from a Buell dealer in Wisconson Got a new set with bushings here if you can't find them. Hank I'd just as soon have yours as deal with my local HD guys. I dont have enough tats for them. Let me know how much, shipped to 24018 and I'll paypal ya. Quote Link to comment Share on other sites More sharing options...
HANKSXXX Posted December 3, 2012 Share Posted December 3, 2012 Buell pn: N0006.1AD Footpeg kit, Rider, XB I think they cost $37.50. I had bushings made locally for 8mm pins. I found the pegs on Ebay from a Buell dealer in Wisconson Got a new set with bushings here if you can't find them. Hank I'd just as soon have yours as deal with my local HD guys. I dont have enough tats for them. Let me know how much, shipped to 24018 and I'll paypal ya. Funny...I heard one of your parts guys had "PAN HEAD" tatooed across his knuckles... I'll send you a PM later...Hank Quote Link to comment Share on other sites More sharing options...
01xxallen Posted December 3, 2012 Share Posted December 3, 2012 I used Buell Ulysses Pegs on my XX. Long ago, I wrote a post about it. The advantage was the width was the same as the Honda pegs, and I used a piece of hobby shop tubing to make a bushing for the Honda pin. You do grind a tiny bit off the edge to make the angle right, but easy and you don't sacrifice strength. Quote Link to comment Share on other sites More sharing options...
racer212 Posted December 7, 2012 Author Share Posted December 7, 2012 Funny...I heard one of your parts guys had "PAN HEAD" tatooed across his knuckles... Dont get me started about that guy.. Quote Link to comment Share on other sites More sharing options...
Warp11XX Posted December 7, 2012 Share Posted December 7, 2012 I haven't heard this story...c'mon...spill it... Quote Link to comment Share on other sites More sharing options...
HANKSXXX Posted December 7, 2012 Share Posted December 7, 2012 Funny...I heard one of your parts guys had "PAN HEAD" tatooed across his knuckles... Dont get me started about that guy.. Bad news travels fast...lol Quote Link to comment Share on other sites More sharing options...
racer212 Posted December 7, 2012 Author Share Posted December 7, 2012 I haven't heard this story...c'mon...spill it... Not really sure there's a story - the owner's kid is my parts manager, and talked daddy into hiring this kid. Kid worked at the Harley store for a couple years before getting tossed and thinks the world begins and ends in Milwaukee. Lots of tats, piercings, and a ratty old Buell. Goes over real well in my metric store some times... I got to think a bit strategically about how I'm going to fix him/lose him since the owners kid likes him. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.