cecome Posted December 14, 2011 Share Posted December 14, 2011 LMK. Quote Link to comment Share on other sites More sharing options...
John01XX Posted December 14, 2011 Share Posted December 14, 2011 I am struggling to get mirror extenders made The machine shop that is making them for me has been slammed but promises that he will have them done before the end of the month. Quote Link to comment Share on other sites More sharing options...
firedlt Posted December 15, 2011 Share Posted December 15, 2011 I have one set of 1" black delron ones for $30. plus shipping if anyone is interested. Quote Link to comment Share on other sites More sharing options...
XXitanium Posted December 17, 2011 Share Posted December 17, 2011 I have extensions on my bike - they were there when I bought it. My Hurricane suffers from less than perfect rear view mirror placement. I doubt these would be the same size I would need. Does anyone know what material these actually are? Delron Site I have an acquaintance who owns a machine shop here. Tx Bill Quote Link to comment Share on other sites More sharing options...
John01XX Posted December 17, 2011 Share Posted December 17, 2011 The European ones are made out of Delrin I am making them out of UHMW-PE (ultra high molecular weight poly ethelene) UHMW is a little stronger and holds it black color better Does the signal wiring connecters fit through the holes in those extenders shown above? Quote Link to comment Share on other sites More sharing options...
firedlt Posted December 17, 2011 Share Posted December 17, 2011 The European ones are made out of Delrin I am making them out of UHMW-PE (ultra high molecular weight poly ethelene) UHMW is a little stronger and holds it black color better Does the signal wiring connecters fit through the holes in those extenders shown above? yes the wires fit through the ones shown above, A guy here locally machined them. I had 2 sets and one went with the bike when I sold it. I was cleaning out the garage and found these, I don"t have anything they fit so just collecting dust. If no one wants em here will probably Ebay em. Quote Link to comment Share on other sites More sharing options...
ndivita Posted December 18, 2011 Share Posted December 18, 2011 The European ones are made out of Delrin I am making them out of UHMW-PE (ultra high molecular weight poly ethelene) UHMW is a little stronger and holds it black color better Does the signal wiring connecters fit through the holes in those extenders shown above? yes the wires fit through the ones shown above, A guy here locally machined them. I had 2 sets and one went with the bike when I sold it. I was cleaning out the garage and found these, I don"t have anything they fit so just collecting dust. If no one wants em here will probably Ebay em. I assume this means all stock length wiring fits and that the mirrors fold up as per the stock configuration? Quote Link to comment Share on other sites More sharing options...
cityboy21 Posted December 18, 2011 Share Posted December 18, 2011 I am struggling to get mirror extenders made The machine shop that is making them for me has been slammed but promises that he will have them done before the end of the month. Hey John, do you by chance have a ballpark figure as to what they will sell for? Quote Link to comment Share on other sites More sharing options...
John01XX Posted December 18, 2011 Share Posted December 18, 2011 Same as they always have been, right around $40.00 These are a good deal depending on what material they are made out of Quote Link to comment Share on other sites More sharing options...
cityboy21 Posted December 18, 2011 Share Posted December 18, 2011 Probably going to wait on yours. I like the idea of the new material you are using. Keep us updated please. Quote Link to comment Share on other sites More sharing options...
XXitanium Posted December 19, 2011 Share Posted December 19, 2011 I found the material properties (I think). It does not address UV resistance. Acetal (Delrin TM) . Quote Link to comment Share on other sites More sharing options...
E.Ness Posted December 19, 2011 Share Posted December 19, 2011 I have the delrin ones, and they are good, no discoloration, stock wiring fits, you might have to enlarge the hole a bit to get the wiring bullet through. (on a 97) fits nice and looks good, makes a big difference. Quote Link to comment Share on other sites More sharing options...
Wario Posted December 21, 2011 Share Posted December 21, 2011 I'll take them if nobody dibs them!!! :icon_pray: I have one set of 1" black delron ones for $30. plus shipping if anyone is interested. Quote Link to comment Share on other sites More sharing options...
cecome Posted December 21, 2011 Author Share Posted December 21, 2011 go for it! Quote Link to comment Share on other sites More sharing options...
E.Ness Posted December 21, 2011 Share Posted December 21, 2011 A tip. you are going to have to replace the bolts that hold the mirror assembly. check the length you will need and maybe go to IKEA (metric) if there is one in the area see if they have what you need at the returns service counter. I am pretty sure they have the bolts with hex/button heads the right length, and they hold up well to inclement weather. E. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.