BDAZ XX Posted July 28, 2009 Share Posted July 28, 2009 I'll put this up in here this week then next week it goes to CL/Ebay. I have to much good shit laying around and not being used so I may as well get rid of it, plus I need to get some steel diving tanks anyway. Brembo w/ shorty pazzo and 2 stock levers=Add steel lines/good pads and you have 1 finger stoppies! $275 50mm Lap timer holder $25 22mm preload adjusters-2 sets $25 ea Abunch of CRG/Pazzo levers fits XX and RC-couple are rashed $125 Chickhawk Tire warmers 120/180-190 size $325 AlpineStar boots size 45. Structurally in good condition outside uncleaned. Just pulled them out of my gear bag where they had been for 2yrs . Make offer? Quote Link to comment Share on other sites More sharing options...
BDAZ XX Posted July 28, 2009 Author Share Posted July 28, 2009 No reasonable offer refused. This stuff is collecting dust. Quote Link to comment Share on other sites More sharing options...
Redbird Posted July 28, 2009 Share Posted July 28, 2009 I've got some naked pics of Jeff that I'll trade you for the Brembo. Seriously tempting, until I remember that the issue with the brakes on my bike is mostly the operator. Still considering it, though....do you have the banjo bolt? IIRC, you need Brembo's bolt, different thread. Quote Link to comment Share on other sites More sharing options...
BDAZ XX Posted July 28, 2009 Author Share Posted July 28, 2009 Its on there along with the washers. This is a seriously amazing brake for the front of the bike. Huge difference between stock and Brembo. Where you normally use 2-4 fingers on a stock unit. A brembo is a 1 or 2 finger approach to stopping or slowing down a bike. Simply an amazing peice of kit. and I'll have to pass on the nekked pics of Jeff. I already have some. Quote Link to comment Share on other sites More sharing options...
jcrich Posted July 28, 2009 Share Posted July 28, 2009 I've got some naked pics of Jeff that I'll trade you for the Brembo. Seriously tempting, until I remember that the issue with the brakes on my bike is mostly the operator. Still considering it, though....do you have the banjo bolt? IIRC, you need Brembo's bolt, different thread. Get the Brembo, get the Brembo Seriously, a Brembo, some Motul fluid, and some Vesrah SRJL brake pads and you will be a demon on the brakes. Quote Link to comment Share on other sites More sharing options...
BDAZ XX Posted July 29, 2009 Author Share Posted July 29, 2009 Bimbo sold to Timbo. Quote Link to comment Share on other sites More sharing options...
jcrich Posted July 29, 2009 Share Posted July 29, 2009 Bimbo sold to Timbo. Well that was easy. Any commission coming my way? Quote Link to comment Share on other sites More sharing options...
racer212 Posted July 29, 2009 Share Posted July 29, 2009 I'll take a set of the Pazzo's for the XX if you've got a decent silver or black set. Quote Link to comment Share on other sites More sharing options...
BDAZ XX Posted July 29, 2009 Author Share Posted July 29, 2009 I'll take a set of the Pazzo's for the XX if you've got a decent silver or black set. All 5 levers go with the dealio so you can mix and match colors/parts if you want. I believe there is one xx clutch and one brake but I do not have a bike anymore to double check. I had the silver set on the xx when I had it. I have some other parts in addition to whats in the picture. I just need to dig them out of the toolbox. I am leaving tomorrow morning for 5 days of diving. If you decide you want it, pp me and I'll get them out to you when I get back on tuesday. Check what shipping is to 23453 and add it to the pp. Quote Link to comment Share on other sites More sharing options...
Speed99 Posted July 31, 2009 Share Posted July 31, 2009 Though its not on the list, Thanks for the Lap Timer! It arrived today. Its been awhile since I got a UPS Goodies shipment so I am excited. Quote Link to comment Share on other sites More sharing options...
Redbird Posted July 31, 2009 Share Posted July 31, 2009 Got the MC today, too, thanks for the quick shipping (2nd day air, even). It's already mounted up and waiting to be bled. Quote Link to comment Share on other sites More sharing options...
BDAZ XX Posted August 2, 2009 Author Share Posted August 2, 2009 Good to hear Rick. Enjoy dropping those 10ths......... Got the MC today, too, thanks for the quick shipping (2nd day air, even). It's already mounted up and waiting to be bled. Cool, I thought you needed it by this weekend and the 3 day shipping would have put it there on monday, so I went ahead and shot it over 2 day instead. Glad you can put it to good use. Now just be phuckin careful grabbing a fingerfull of front handle, that shit's GOOOOOD! On a different note: I was stoked today! We mounted our Kayaks up on the Bimmer for a trial run before we leave for Maine next week. While out on a test run I ran across a private motocrass track. I stopped and knocked on the door but no one was home. I am going back again to ask if we can ride there. I have been looking for a dirt track to teach K8 on, the pavement scares her alittle and this would be a perfect place to teach and play ride at......... Quote Link to comment Share on other sites More sharing options...
06Busa Posted August 9, 2009 Share Posted August 9, 2009 I'll take a set of the Pazzo's for the XX if you've got a decent silver or black set. All 5 levers go with the dealio so you can mix and match colors/parts if you want. I believe there is one xx clutch and one brake but I do not have a bike anymore to double check. I had the silver set on the xx when I had it. I have some other parts in addition to whats in the picture. I just need to dig them out of the toolbox. I am leaving tomorrow morning for 5 days of diving. If you decide you want it, pp me and I'll get them out to you when I get back on tuesday. Check what shipping is to 23453 and add it to the pp. If he passes. I will take the levers. Quote Link to comment Share on other sites More sharing options...
hey_allen Posted August 12, 2009 Share Posted August 12, 2009 Would the lap timer mount interfere with anything on a stock bike's gauge area? If not, I'm interested. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.