SC350 Posted June 18, 2008 Share Posted June 18, 2008 I bought one of these, but haven't installed it yet. The directions are incomplete, and the pictures are impossible to make out. 1. What holds the signal lenses in place? The tail lights have bolts that screw from the inside of the undertail. 2. What holds the signal LED's in place? 3. What are the 5 nut, bolt and washers for? 4. What are the 4 rubber grommet nut, washer, bolts for? Quote Link to comment Share on other sites More sharing options...
CxBXR Posted June 18, 2008 Share Posted June 18, 2008 I bought one of these, but haven't installed it yet. The directions are incomplete, and the pictures are impossible to make out. 1. What holds the signal lenses in place? The tail lights have bolts that screw from the inside of the undertail. 2. What holds the signal LED's in place? 3. What are the 5 nut, bolt and washers for? 4. What are the 4 rubber grommet nut, washer, bolts for? Which version did you buy ? the one with the 2 round brake lights or does it have horizontal tail lights ? 1. Nuts go on inside of undertail that attach to the bolt on the back of the led's, which hold it in place 2. Signal led's same way. 3. Use those to attach to tail fairing section & to help reduce vibration noise issues 4. See above 1 & 2 go to tail lights & signals ****This information may be wrong, it was based on the round taillight version **** Quote Link to comment Share on other sites More sharing options...
SC350 Posted June 18, 2008 Author Share Posted June 18, 2008 The horizontal. I bought one of these, but haven't installed it yet. The directions are incomplete, and the pictures are impossible to make out. 1. What holds the signal lenses in place? The tail lights have bolts that screw from the inside of the undertail. 2. What holds the signal LED's in place? 3. What are the 5 nut, bolt and washers for? 4. What are the 4 rubber grommet nut, washer, bolts for? Which version did you buy ? the one with the 2 round brake lights or does it have horizontal tail lights ? 1. Nuts go on inside of undertail that attach to the bolt on the back of the led's, which hold it in place 2. Signal led's same way. 3. Dont know but probably use those to attach to tail fairing section & to help reduce vibration noise issues 4. See above 1 & 2 go to tail lights & signals Quote Link to comment Share on other sites More sharing options...
SC350 Posted June 18, 2008 Author Share Posted June 18, 2008 I sent a message to Rack In Motion, the place I got my Mototeck undertail kit from. He said the signals and the signal lenses get hot glued in place. WOW! What a cheap deal that is. Quote Link to comment Share on other sites More sharing options...
SC350 Posted June 19, 2008 Author Share Posted June 19, 2008 WIRING: 3 tail lights on mototeck undertail kit bike green to undertail black X3 bike green/yellow to undertail grey X3 bike black/brown to undertail red X2 I think I have the tail lights part planned correctly, PLEASE correct me if I am wrong left turn signal orange green right turn signal lt. blue green mototeck undertail kit turn signal lights black grey yellow and a resistor for each side I have no clue what wires to connect on the signals and which wire to install the resistors in line to. Quote Link to comment Share on other sites More sharing options...
CxBXR Posted June 19, 2008 Share Posted June 19, 2008 WIRING: 3 tail lights on mototeck undertail kit bike green to undertail black X3 bike green/yellow to undertail grey X3 bike black/brown to undertail red X2 I think I have the tail lights part planned correctly, PLEASE correct me if I am wrong left turn signal orange green right turn signal lt. blue green mototeck undertail kit turn signal lights black grey yellow and a resistor for each side I have no clue what wires to connect on the signals and which wire to install the resistors in line to. Chunk those resistors in the trash & pick up one of these PLUG&PLAY Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.