arcticflipper Posted August 8, 2006 Share Posted August 8, 2006 What can I use to buff the panels to give a new bike shine? Have some scratches and paint damage too that I need to take out. Quote Link to comment Share on other sites More sharing options...
Canadian Bird Posted August 8, 2006 Share Posted August 8, 2006 Would a Clay Bar work and a top quality wax/synthetic shine. Use an electric buffer? there are products that take out "swirl" marks. Quote Link to comment Share on other sites More sharing options...
Bandit XX Posted August 8, 2006 Share Posted August 8, 2006 What can I use to buff the panels to give a new bike shine? Have some scratches and paint damage too that I need to take out. Well depending on how deep the scrathes are and the color of your bike. If you can feel the scraches with your fingernail you can sand the area lightly with 2000 grit sand paper but be careful not to sand to much Honda did not put very much clear coat on the bird and if you go throuh the clear coat your screwed.Use a foam cuting pad on a air or electic buffer and use 3M part number 06011 compond Until sand scrathes are gone then on the rest of the bike use 3M part# 05928 with a soft foam pad to get rid of fine scrathes and dull spots AFTER BUFFING IS COMPLETED WASH BIKE RIGHT AWAY,ONCE COMPOUD DRYS YOU HOSED.Dry bike completley folow up with Presta Choma swirl remover If you can't find presta Maguires makes ome swirl remover also. Wax and your done your bike will shine like a diamand up a goats ass. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.