mesenger1 Posted August 12, 2005 Share Posted August 12, 2005 Is there any other alternative for a stator/alternator from H :?: onda? My bird is not charging any more, I keep charging the batery. I have never open the bird, do I need only the stator or do I have to get the rotor also? Where do I go for non Honda parts? Thanks in advance for you input. Messengeer1 Quote Link to comment Share on other sites More sharing options...
CBR-RR-XX-CESS Posted August 13, 2005 Share Posted August 13, 2005 Might just be your regulater,don't run it anymore till you find out for sure,if you stator is still good it won't be for long if it continues to run Quote Link to comment Share on other sites More sharing options...
brianmacza Posted August 15, 2005 Share Posted August 15, 2005 I have a similar problem with my '97 Bird. I have tested the charge rate and it seems within spec. The battery runs down if I leave the bike parked and don't use it for a couple of days. Funny thing is, if I bump start it it seems to start fine, the plug on the regulator isn't burned at all (no blackening caused by heat), and it seems to charge fine. The battery is new (but may be a dud - dunno about that part yet - will have to get it tested by an autoelec I guess) So I charge the battery on a trickle if I leave the bike for more than 2 or 3 days and that keeps me going - a crap compromise due to my laziness I guess. Quote Link to comment Share on other sites More sharing options...
Buzz Posted August 15, 2005 Share Posted August 15, 2005 Not sure if this is the same problem as you are encountering. Hope this helps. http://www.cbr1100xxforums.org/forum/viewt...a+dealer+stinks Quote Link to comment Share on other sites More sharing options...
Stretch Posted August 16, 2005 Share Posted August 16, 2005 Mesengeer1, I just went through what you are describing. I checked the charging system as described in the manual, the bike would not charge the battery "at times" after push starting it would run fine all day long but wasn't charging the battery. Turned out the stator was bad, even though it tested ok according to the manual specs. I have a new rectifer, I'll sell it to you for what I paid plus shipping, good luck. Stator part #31120-MAT-E01 $165.84 Cover gasket #11392-MAT-000 $6.93 Rec/Reg. #31600-MAT-E01 $109.81 I got my parts from Ron Ayers Quote Link to comment Share on other sites More sharing options...
mesenger1 Posted August 20, 2005 Author Share Posted August 20, 2005 Thanks for the advise I gat a stator from DenniKirk seems to be working fine, I have not have a chance to check the numbers, but is runinng strong. Thanks to you all. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.