Jump to content
CBR1100XX.org Forum

Failure


SD Marc

Recommended Posts

You mean rupture, Marc?

Has anybody ever crimped the fuel line off with Vice-grips before or something similar?

Pressure or return line? Your bike is fuel injected, right?

Link to comment
Share on other sites

'99 FI. The pressure in line. It did not rupture under pressure, I noticed it leaking when I had the tank up. The outer jacket has a split running lengthwise from the fuel rail end up for about an inch. It appears to have split along a seam.

Link to comment
Share on other sites

I don't have a camera for the pics but I dremelled off the crimps on the stock fuel line, removed the line so I could reuse the stock banjo connectors. I replaced the hose with ss braided line and red anodized clamps (just standard automotive screw clamp with an anodized cover). Total cost $15 time 1/2 hour.

Now I can cancel the stock replacement I ordered through the stealer for $85.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Terms of Use