TurboJoe

Reduced from 6500 to 5900 firm...winter sale

Thanks Chewtoy I would consider partial trades as well..no junk please. Just FYI for anyone interested.

Thanks for the compliments PTXYZ. The bike handles exactly as it should have from the factory. The front is now fully adjustable and the length of the arm is very conservative. As you can see it does not exceed the tail section. it will carry the front wheel under WOT but not the tank in the chest on your back type of wheelie :-) You can carve canyons quite nicely as you can see it has been through the Dragon. She handled the twisties as well as she did before the stretch. I would say its an all-purpose bike now. In July I did 1100 miles in 3 days through Ga TN NC and KY very comfortably.

Sorry I did forget the Location I am in Newnan, GA about 30 miles SW of Atlanta

Unfortunately...my heart related complications are motivating me to do what I never thought I would do...sell my baby. Here it goes: 2002 CBR 1100 XX ~15000 miles Excellent condition No problems at all (Garage kept so body is excellent as well) ZXXX conversion ZX14R Forks SP1 Triples Billet Clip ons ZX14 Wheels ZX10 Fender Braided Brake Lines Braided Clutch Line HID headlight Conversion Trac Dynamics Chromoly Arm 6-over Mototeck Undertail Real Carbon accents Power Commander Puig Double Bubble windscreen Akrapovic 4-2-1 Full Exhaust Header system Priced to sell at 5900.00 Firm (Cash or Certified Check) Clear title in hand Buyer responsible for pick up/shipping I am in Newnan, GA about 30 miles SW of Atlanta No corner/cost cut in conversion...you will not be disappointed

Sold!!!!

Yoshimura Dual Slip on exhaust CBR1100XX CBR 1100XX here is a link to the item on ebay just in case anyone prefers a guaranteed transaction

I am selling my Yoshimura Dual Slip-ons 300.00 plus shipping You can have the OEM header for free if you purchase the slip-ons but it will be shipped separately requiring additional shipping You can see the exhaust on my photos of my bike Dos Equis...only changed because I went with a 4-2-1 Akrapovic. Pipes are in A-1 condition. I will answer IMs in order and first to pay gets them

I have had more people notice the wheels than I have notice that its a front end swap. I did a 6-over stretch so it would be subtle. So Hanksxxx gets one point for his comment. I love to keep some originality... But blackhawkxx gets one for having the same thought as my best friend. Decisions decisions decisions.... Keep it coming guys

If you are thinking of doing the ZXXX conversion...Do not use the ZX14 fender. Since I fininshed my project I have been using a Carbon Fiber ZX14 Front fender. The guys here on the forum warned of the blockage of air flow to the radiator. 210 -230 degrees was the norm highway / traffic respectively. I finally got around to making brackets to use the ZX10 fender. Installed and tested both highway and heavy ATL traffic...190-208 degrees. WOW what a difference. Now I regret the 200 dollars spent on the carbon 14 fender. Whats worse is I had to slightly modify the upper tips for clearance purposes...urrgghhh Birds are more narrow between fairings. Lesson learned - Listen to your fellow forum members warnings!!! What do you guys think...get a carbon ZX10 fender?....stay silver?....or just add carbon side plates to the silver fender???? ZX14 fender is the Carbon one (for carbon reference only) ZX10 fender is the Silver one

Hey Thanks XX_Rider...I will load and try tomorrow.,,weather permitting

Thanks for the replies...work has taking me away from riding/working on the bike at the moment. I want it right before I take it on a trip back home to TN to ride the skyway and Dragon in July. It is close now but I will play with the map on the road with the laptop and take plug readings for confirmation. A custom map might be created if I can get it on my friends dyno while in TN.

Hey Guys, Just out of curiosity....When it comes to PCIII maps are the PCIIIUSB and older serial PC mapsinterchangeable??? I need a starter map for Yoshi Slips and K&N...there is not a map pc3USB map for this set up on my '02 but there is for the older 99 model.

Yeah I know...I practically lived on the hill. If I had a dollar for every Killboy photo taken I would be able to Turbo my Bird. LOL Unfortunately that is the only time I can get there this summer while the wife and kids visit my in-laws in Roane county.

iFanboi...I will be riding the Dragon the week of the 4th of July. All of my friends back home in Knoxville are begging me to come up. I actually was in Knoxville the last two days ... but without the bike :-(

No they are 4 pots...i have plenty of cushion with a nice firm feel.

Ride is excellent...I am very pleased. Stan maybe you can explain this...I used an F4i front brake master with 08 Hayabusa Tokico's with spacers (ZX14 Nissan were very pricey) and they work great. I was prepared to buy a radial master but I see no need. The F4i MC is slightly larger than the Busa's but everyone stated that it would be very soft. I am sure I got help from the braided hoses. I tried it for looks but functionality was the outcome as well. Looks great! Please let me know where you set your triples - mm from the top of fork tube to top of upper tree. We either saved you some costly experiences, or we were the cause of it - either way, you're welcome! Out of town at the moment but will post the measurements when I get home this weekend. A full report will be posted with pics soon

OK All....Introducing.......Dos Equis. And to everyone that replied to my post while I worked my way through the ZXXX build, I want to say "Thanks Guys". Your help saved me some costly experiences.

Thanks Guys...I may do a Halo w/ demon eyes for show purposes. I will check out the LED but will probably just run 2 HIDs. I never need a Hi-beam as the HID is brighter anyway IMHO.

Hi all... I have been running a HID (6000k 35W AC ballast) in my low beam for about 6 months..no issue at all. Question: Is there an advantage of doing a projector or is the factory reflector about as good as it gets?

I have a front fender...excellent condition no rash...Heading to UPS in the morning for another item sold so if you want it fast let me know. $50.00 shipped to your door if in the continental 48

iFanboi...you are in East TN. You are close but not that close LOL. I may put up pics later this weekend...My selling price will include shipping. So all offers must be somewhat reasonable....

Ended up with a "Carbon" ZX14 fender...I am happy with the looks. Not as streamlined as the 10 fender but its a very nice piece. John01XX thanks for pointing me to the rad grille....I like that and it has a reasonable price. Poida...I find a lot of Aussie parts I like buy the shipping is extreme every time

Sorry Guys...I assumed (shoot me) by mentioning "Silver" that it's a 2002 model. I live in Georgia...not the country but the state.

I am in process of a ZXXX conversion If anyone is in need of excellent condition XX front end parts I have them. Only 12,000 miles on my garage kept bike so they are like new.. Forks triples Wheel and Tire Rotors calipers Master Cylinder Silver Fender Taking reasonable offers via PM :-)