nick11h

Good Morning 1 and all Can any1 help please... I need to change the rear tyre on't bird and have noticed that it is fitted with a 190 mitch tyre, Is this common practice to improve handling and if so does it work as i'm not overly confident in the handling at the moment or is it some cackhanded tyre monkey's way of getting round an ordering delay? On all my previous sport tourers i have always run with bridgstone 020 or 021 and been happy with wear and handling. Can anybody advise and comment please. cheers for now Nick

Would the switch still be faulty if the main beam still works ok? Because i only loose the light when i go from high to low beam and the park light is fine. Thanks for helping bye the way

Is there anyone out there that can help me please? I rode off down the road a few Nights ago and descovered my dip beam had blown so like a good boy i went off and bought a new bulb (12v 55w) H7 fitted it and started the bike and........ zip...nil.. nada checked the buld and as far as i could see it was fine but just incase i went and bought another one fitted it and...... yep you guessed it same as before i have since put a volt meter on the battery and it reads 13.7 engine running the coupler before the bulb reads 8.5 volts and the adaptor from the coupler to the buld when fitted also reads 8.5 volts. Its almost as if the power is being lost from the spades of the bulb to the element inside. I am at a total loss as to what it could be! Is there anyone out there that can help please please please Yours in despare Nick