02XXCA

When opening gallery viewer only see black screen, if I download a picture I can see it. Inspected item using chome and see these errors.

Forrest didn't have the benefit of sea level on this speed run, nothing like a mile high!

I think I have proof what you need to get to 200 MPH ,

It looks like my turn signal relay is throwing power down the ground wire. I may have crossed the plugs for the BAS and the turn signal relay which may have also screwed up the BAS as well. Need to order those and see what happens next. Stan, I will give you a call after I get those parts and see if I still have issues.

Yeah, all others things appear to work without issue.

Swapped ecu and all relays and still wont cycle the fuel pump upon key turn. The kill switch works, the kickstand switch works, swapped BAS and still no work. I can jump the fuel relay and get pump to cycle so I know it's not bad and the bike will run until I pull the jumpered relay. All fuses checked as well. I'm guessing there is a bad wire between the ecu and relay so it's not get to the signal to close and allow the pump to prime. Any other suggestions? 107K, should I just sell it know that's broken in. Chris

Think my ECU bit the dust, bypass the fuel cut off relay and pump cycles on bike will start, need to test with a borrowed ECU. When you have it jumpred the kill switch or key will not turn the bike off, only the kickstand switch. May have to rig it for a quick trip. Anyone siting on a used ECU for an 02 that they want to part with?

Checked my 02 at 75k and all were within spec, 1 exhaust was a little tight.

Since I have boiled over idling in 85 degree heat and spilled coolant in the past, also with the fan running continually I have drained my battery on more than one ocassion as well. I too have to recently update my Stator after 80K and am now running NGP+ and it seems to run a little cooler than before. Now I just need a good volt meter to know whether the stator is oputting out proper current and keeping it from killing the battery .

I'll miss her! Good for you.

Bought Heated Motorcycle gloves on 2/11/11 from online retailer and this is the response I got back when I asked for them to be covered under the 1year warranty for bad stiching on the back of the both R & L gloves! Stay away from there product as I paid $199.00 for these gloves that failed in less than 2 months, what does that say about the quality. I have gloves thatpaid 1/3 the amount that I have worn for years! From: Ventureheat Dealer Support [mailto:dealer@ventureheat.com] Sent: Monday, April 18, 2011 9:33 AM To: XXXXXXXXXl@comcast.net Subject: Defective stitching on gloves Hi there, I do apologizes, but that would just be wear and tear we can not replace them, but we can offer you a 20% discount if you would like to purchase another pair at this time. WARM regards, Ashley Powers, Dealer Support dealer@ventureheat.com +VENTURE Heated Clothing DIRECT: 714-251-6446 SKYPE: Venture.Support TEL:1-310-412-1070 ext.111 FAX: 1-610-423-5257 5932 Bolsa Ave. #103 Huntington Beach, CA 92649 USA WEB: www.VentureHeat.com

Yes she did!

Our Starting weight is: (Will update with Hobi and Ruhi's number when they post up) RICK: 232 (Sunday: 3/6/2011) RICH: __________________ RUHI: __________________ 02XXCA: 224 (Monday: 3/7/2011) DO IT!!!!

Those look pretty cool, not sure they will work with the wingrack! Steve, you still have my stock cans?

Check this link of local craigslist http://seattle.craigslist.org/est/mcy/1859806219.html

Actually looking to replace the one you gave me!! Thanks again BTW. Brake pedal whore Do you actually use it?

Great work Randy!

Envious!

Russ, I too read your post on PNW forum and you sure were lucky, sounds like ABS brakes may have made the difference! Good luck finding a Bird, you can't go wrong. Chris

LOL

I found a unused(they say) copy on ebay for CS. Hopefully it is legitimate and then I can upgrade from there.

Looking to buy a legitimate full retail copy of Adobe Photoshop for Windows. CS or CS2 version. Thanks Chris

80K on my 02.

Great work Stan, Can you take one more picture and then mark it to show where you made the relief cut for the spring.

Anybody else have a another pair, mine are pulsing as well on my 2002.