Chawk60

Thanks to everyone who replied. After alot of tweaking and incrimental twisting of the sBends (with a micrometer) :wink: I've got them aligned (so it appears) from the rear. I'll exhale when everything is tightened and finished..

Has anyone had vertical or horizontal alignment probelms while installing these? :?: The right side looks great but the left sits low and canted out to the right noticibly. There aren't too many ways the S-pipe can go on, but can't really figure out what the problem is. I'll take any suggestions or photos for insight. Thanks in advance.

I got my mirror extenders via Helvet and their Blackbird group. Arrived quickly (considering where they came from) and the price was good. PM him if you need any small BB items...you may be surprised at what they have. (I would list their site, but don't want to incur the wrath of moderators for plug violations) :cry: UPDATE---> after some encouragement from a shipmate, here it is! http://bb.superblackbird.info/viewtopic.php?t=20 I also wanted to thank all the folks who input into that post, including John01XX, which ultimately led to me to enjoy a broader mirror experience. THanks!

Hey! Newguy here...I was hoping to tap the corporate knowlege base (and yes...I did search first) :wink: I'm hooking up an aftermarket led tailight setup. In trying to remove my rear t/s, I can't come up with the correct connection scheme to the relay. I'm using a Tridon EL-13 (3 prong variable electronic) flasher. I'm trying to avoid blowing a whole box of fuses... Can anyone please tell me how to connect the 3 wires that go to the flasher relay? I have grey,green and white/green wires. Thanks in advance!! The trick was to only use 2 of the connector wires vice the three that are there...who would have thought? ](*,)

Is there anyone who wanted a HI beam only? I was getting the set, but really want just lows. If so, please PM me...I'm in Atlanta, and don't mind shipping it to where ever you may be.

I have a Coerce that I got from Japan and have not installed. The instructions are in Japanese, but it's fairly straight foward considering what you have to do, especially if you have a service manual. If you are interested, let me know and we can work out a price. It cost me ￥252,000 (~$240). Here's the official link. http://www.dax.co.jp/coerce/fenderless/99c...9cbr1100xx.html Good luck in whatever you end up getting. :scooter: