lexxus

MAAAAAAAAARK Those Wire's

I'd wonder,Whats up with this bird. I thought i saw this bird sell not to long ago, On ebay, But maybe it didnt sell

I've been doing it this way, All the time My bike,Full fairing, forks off, is the only way i change my fork oil.

Has anyone found a source, For Led replacements for the new style Undertails. Seems like mototeck maybe gone.

Yep several,No replys yet.

Are we ready yet?

Oh, you think your going to get off that easy, do you? I don't think so.... You think you can just come in here and plop a single. I want a whole thread with details... +1, tell us more tell us more!!! Yeah tell us more! what bike and year is the front fender off? Gives it more of the literbike look.

You got it, If i can get it

John01XX occasionally brings some back from Europe and sells them, but most are short lead. I have the short lead and intended to modify it to a long lead to put on my still in box HIDs. Thinking about selling bird, though. So -- may have a short lead Euro pod, HIDs and more shit on market soon. Let me know'

Looking for a euro switch, with the long lead. I installed Hid's and want to shut them off when,Warming up the bike. Did'nt some one on the board sell them?

Looks more like a 1000rr to me.

Does anybody know, if they are still in business? I need a replacement led for my undertail. Website returns my e-mail.

Thanks, Hoping for the best.But i wont know how it runs for a couple mores weeks. As i have it inside my apartment. Dinning room/garage and not wanting to pull it out and put it back,waiting for the weather to get consistent enuff to leave outside.

Display not showing either. I also seem to remember a thread saying that it's important to ground the PCIII to the battery and not earth (frame). Good luck with your diagnosis. Pc3 is grounded to battery. Fuel pump and PC3 Fixed. problem was connection wires were switched.Grounding out fuel pump. thanks chris,For the heads up on the wires coming out of the connectors,So easily. To all with pc3's, If the connections come out of there clips,To make sure, You put them back right. Make sure all the power wires, witch are the red ones, Connect to each other by plugging them into there own connections to match all the red power wire's together. Other wise will ground out.

Display not showing either. I also seem to remember a thread saying that it's important to ground the PCIII to the battery and not earth (frame). Good luck with your diagnosis. Pc3 is grounded to battery.

Well well, more drama. Replaced the switch,thanks stan(cbrxxquad) for the use of it.But that was'nt the problem either. The problem is the pc3. I checked all the ground wires, looking at the schematics in the service manual, I noticed the ground wires from the fuel relay,Went to the fuel injectors,So i removed the pc3,Plugged the oem injector's back in, turned the key,And the pump comes on.Now my problem is ,Why is the pc3 grounding out the fuel pump,When it is installed?After i put the oem injector plugs back on,and the pump worked.I reinstalled the pc3,And the same thing happened,No pump.Has anybody had these symptoms before,When installing a pc3? I have the install instructions W/Pic's.

rear sprocket 80lbs axle nut 69lbs front sprocket 40lbs

Really???? Yep, when it get's wet, the screen fades for a minute, By the time i dry the bike, All clear and ready to go.

I wash my bike,At the pull in self serve car washes, and haven't had a problem with water yet.

Never Mind. I went to a friends house,who also has a99. We switched ecm's and mine,Works. But thanks keith, and joe (rockmeupto125) for offering me the use of your ecm to test on my bike. YOU THE MAN! Now i will try the on/off switch again.

Never Mind. I went to a friends house,who also has a99. We switched ecm's and mine,Works. But thanks keith, and joe (rockmeupto125) for offering me the use of your ecm to test on my bike. YOU THE MAN! Now i will try the on/off switch again.

Yep, see one there now, Thanks keith

140

Mounted on dash, two wire hookup.