XXera Posted May 8, 2004 Share Posted May 8, 2004 Come on, give the a break. They just look like a few typo's to me........ especially if you don't proof read. :oops: Quote Link to comment Share on other sites More sharing options...
mrcisco Posted April 5, 2005 Share Posted April 5, 2005 So, is anyone running Mobil 0w 40 in their XX's. If so, how is it compared to Amsoil? Quote Link to comment Share on other sites More sharing options...
Pete in PA Posted April 5, 2005 Share Posted April 5, 2005 How many pages back did this dead thread come from??? I wouldn't run 0W-40 just because it's not called out for in the manual, where 10W-40 and 20W-50 are. With you being in Arizona I would stick with the heavier oils. At LEAST 10W-40. JMO. Quote Link to comment Share on other sites More sharing options...
Northman Posted April 5, 2005 Share Posted April 5, 2005 I have 5 quarts of Amsoil 0W40 sitting here waiting for installation in the XX in the next week. Last oil change I used Castrol Syntec 5W50, and was less than impressed with my shifts after switching from the Castrol 10W40 motorcycle oil. The more I've learned about oils (and engines) in the last year or so leads me to believe we've all been using way too thick of an oil, which is doing nothing more than robbing us of horsepower. Not to mention how slowly it circulates on cold starts :wink: Quote Link to comment Share on other sites More sharing options...
The Krypt Keeper Posted April 5, 2005 Author Share Posted April 5, 2005 Holy shiznit Batman :shock: Someone is waking up posts from the dead.. I have also switched to 5W-40 and havn't noticed a shifting problem.. Only time will tell and when I take a trip to the mountains on how good the new thinner oil is. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.