matey_peeps Posted April 29, 2003 Share Posted April 29, 2003 my front turn signals are dual filament, right? so they're supposed to be on whenever the bike's on, right? they flash fine, they're just not on all the time. bulbs look good. it's both of them that are like this. any ideas? or D) Hookers. :?: Quote Link to comment Share on other sites More sharing options...
Redbird Posted April 29, 2003 Share Posted April 29, 2003 Did you buy the bike new? The previous owner may have disabled the running lights. Just a suggestion, 'cause that's what I did to mine after tinting them :cool: . Quote Link to comment Share on other sites More sharing options...
XX RATED Posted April 29, 2003 Share Posted April 29, 2003 There are two plugs for each side. One for the running light and one for the signal. Possibly the running light plugs are disconnected. Quote Link to comment Share on other sites More sharing options...
Pete in PA Posted April 30, 2003 Share Posted April 30, 2003 You can also get a 1157 bulb in wrong with the two diff. level tits in the wrong slot. I see it all the time on cages with super bright taillights and then no brake lights. also check your turn signal switch is fully springing up after turning off the signals. Quote Link to comment Share on other sites More sharing options...
callisto Posted May 8, 2003 Share Posted May 8, 2003 Does my 98 Bird have running lights? I've not see them :???: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.