cbrxxman1 Posted March 17, 2004 Share Posted March 17, 2004 How do you shim the rear shock 6mm. Quote Link to comment Share on other sites More sharing options...
RodeRash Posted March 17, 2004 Share Posted March 17, 2004 The washer goes between the removable bracket at the top of the shock and the frame crossmember. The easiest way, is to have a shim that is open on one end, (sort of a "U" shape) so that you can put the bike on the center stand, loosen the top bolt, and slip the shim into place. If you use plain round washers for shims, you will probably need to remove the entire shock to get the shims in place. Then you will need to fight getting the top shock cross bolt fit back into the locating hole for the coolant overflow reservoir. Quote Link to comment Share on other sites More sharing options...
Involute Posted March 17, 2004 Share Posted March 17, 2004 everything you need to know and more.................. http://www.ixxra.com/spacers.html Quote Link to comment Share on other sites More sharing options...
oldbird Posted March 17, 2004 Share Posted March 17, 2004 Just slot the washers and slid them right on.Mine have never come loose. Quote Link to comment Share on other sites More sharing options...
cbrxxman1 Posted March 17, 2004 Author Share Posted March 17, 2004 That looks easy,will that help with the rubbing from a mototeck tail to. thanks for the info. Greg Quote Link to comment Share on other sites More sharing options...
cbrxxman1 Posted March 18, 2004 Author Share Posted March 18, 2004 As always you guys are very helpful thanks bro's. Greg. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.