Jump to content
CBR1100XX.org Forum

Thoughts on the Power Commander map?


JB4XX

Recommended Posts

Loaded map Elton Fish had originally put in the 2001 Turbo bike. Very lean down low, I put one in to richen it up for a while, what do you guys think? Lean and mean or richen it up some down low? I also installed fresh set of plugs and fresh oil before a get it out this weekend and P L A Y!!

pc3mapturbo.jpg

Link to comment
Share on other sites

Why do you think you need to screw around with the map?
Are there driveability issues, fueling issues, or what?

Generally speaking, I wouldn't make changes without at least a wide band that logged on the bike.

That all has to work with specific fuel pressures, ignition timing, fuel, etc.

Link to comment
Share on other sites

Will check AFR and report back.

After install, bike smoked on decel, cracked it open and found it missing part of piston ring, afraid /lean..detonation caused it.

Link to comment
Share on other sites

If you don't have data logging capabilities along with enough open road to air the bike out, find a tuner familiar with turbo bikes and have it tuned.
11.5 AFR is a pretty safe target at full boost.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Terms of Use