cecome Posted July 5, 2012 Share Posted July 5, 2012 any one know the OD and id of a washer that will work for adding a 1/4 to 1/2 inch for my font end??? Quote Link to comment Share on other sites More sharing options...
John01XX Posted July 6, 2012 Share Posted July 6, 2012 I forget the correct size but others have used pieces of PVC pipe cut to what ever thickness you prefer. Quote Link to comment Share on other sites More sharing options...
cecome Posted July 6, 2012 Author Share Posted July 6, 2012 thanks man....I have a road trip in the near future and this will help. do you sell any valving kits?? Quote Link to comment Share on other sites More sharing options...
redxxrdr Posted July 6, 2012 Share Posted July 6, 2012 I wasn't sure what you were asking. But John answered correctly. I don't remember the size, but schedule 40 PVC pipe is what I have in my SV. Make sure you clean it really good after you cut it. I would check with Rick at Cogent Dynamics for emulators. He did a group buy for us a number of years back. Pulled the forks and sent them to him with my weight and riding style. They came back with new springs, gold valves, spacers, and oil installed. AND all of my old parts. SAG was dead on, right out of the box. Many people sell the emulators on line, most at less than the price listed on the Race tech site. Quote Link to comment Share on other sites More sharing options...
testrider Posted July 19, 2012 Share Posted July 19, 2012 any one know the OD and id of a washer that will work for adding a 1/4 to 1/2 inch for my font end??? I measured the inside diameter of the fork on my 97 XX and it's 37 mm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.