TFT Posted April 10, 2012 Share Posted April 10, 2012 In order for the rear brake pedal to actuate the rear brake light I have to have the brake pedal mashed. It would seem it should activate the brake light with just a little movement of the pedal. how do I adjust this? Quote Link to comment Share on other sites More sharing options...
Mikey Posted April 10, 2012 Share Posted April 10, 2012 Behind the pedel within the frame should be a spring connected to the pedel. That is then connected to a switch. The switch can be adjusted by spinning a plastic collar that should bring the spring closer or further away from the switch. This is how you can fine tune the rear brake. I'm doing this by memory so someone is welcome to correct. Quote Link to comment Share on other sites More sharing options...
Chewtoy Posted April 10, 2012 Share Posted April 10, 2012 Quote Link to comment Share on other sites More sharing options...
Mikey Posted April 10, 2012 Share Posted April 10, 2012 Yah see, what I said! Quote Link to comment Share on other sites More sharing options...
TFT Posted April 10, 2012 Author Share Posted April 10, 2012 Thanks guys. Got it fixed. I don't have a manual here in Arizona and I've never had to adjust it before. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.