Jump to content
CBR1100XX.org Forum

Rejetted Birds


86gn

Recommended Posts

What jets and settings are you using?

What elevation do you ride at?

What other engine mods?

I recently rejetted my 97 with a Factory jet kit. I haven't put very many miles on yet but it seems to run much better. It will either spin the tire or pull a wheelie in 1st gear. After I ride some more I may need to fine tune it but for now this is what I have.

145 mains

stock pilots

clip in second positon from top

Akrapovic slip ons

K&N filter

1100' elevation

I looked down the intake runners when the carbs were off and it looked like there was quite a bit of carbon on the valves so I am running some Sea-Foam thru it now.

Link to comment
Share on other sites

I'm running a DynoJet Stage 1 Kit, Jardines RT-One Carbon

Slipons, and a K&N aerocharger air filter.

I'm in Houston, which is at sealevel and has a mean temp of about

80 deg. F.

DJ142 Mains (one size up from default)

Clips 3rd from the top (default)

#40 Pilots (one size down from stock)

Pilot screws 2.5 turns out (stock)

It makes 5+ peak horsepower over stock, more in other areas..

Great torque curve too..

If you don't wanna spend money on the pilots, you

can use the stock #42 and set the pilots at 1.5 turns out

(but it'll run a bit rich up to 4K RPM)

:cool: TJ :cool:

Link to comment
Share on other sites

Sea Foam is a do-all gas additive that seems to be gaining popularity around here. I have heard good things about it......we will see.

I have used Xylene for an octane booster/cleaner in the GN with good results.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Terms of Use