JB4XX Posted September 8, 2009 Share Posted September 8, 2009 Anyone have any of these parts? Tank can have some scuffs...no huge dents, I have one of those! Broke off a bolt in my rear master cylinder and cant get it out....just one more turn POP!!! Dammit! Stock rear wheel spacers, or the measurements to see if some of the ones I have laying around that look like front spacers might be for the rear... THANKS!!! Quote Link to comment Share on other sites More sharing options...
Hobicus Posted September 8, 2009 Share Posted September 8, 2009 Anyone have any of these parts? Tank can have some scuffs...no huge dents, I have one of those! Broke off a bolt in my rear master cylinder and cant get it out....just one more turn POP!!! Dammit! Stock rear wheel spacers, or the measurements to see if some of the ones I have laying around that look like front spacers might be for the rear... THANKS!!! I have a sack of calipers here, but no master cylinders, I don't think... I'll check tomorrow when I get home from work. Quote Link to comment Share on other sites More sharing options...
JB4XX Posted September 8, 2009 Author Share Posted September 8, 2009 THANKS RICH!! Quote Link to comment Share on other sites More sharing options...
cbrxxquad Posted September 8, 2009 Share Posted September 8, 2009 I will look but you could send me the other one and I can fix it. Quote Link to comment Share on other sites More sharing options...
JB4XX Posted September 8, 2009 Author Share Posted September 8, 2009 I will look but you could send me the other one and I can fix it. I'll give it a try tomorrow then it is in the mail. Probably a 5 minute job with the right tool doing it! I mean tools. :icon_shifty: Luv you Stan! Quote Link to comment Share on other sites More sharing options...
JB4XX Posted September 9, 2009 Author Share Posted September 9, 2009 Anyone have a tank? Quote Link to comment Share on other sites More sharing options...
cbrxxquad Posted September 9, 2009 Share Posted September 9, 2009 Anyone have a tank? I have a Ti one, not to bad, some rusty inside maybe some small dents. Quote Link to comment Share on other sites More sharing options...
JB4XX Posted September 9, 2009 Author Share Posted September 9, 2009 Anyone have a tank? I have a Ti one, not to bad, some rusty inside maybe some small dents. After digging out my body panels, I'll have to invest in some paint or HongKong specials sometime this winter or spring. Going for RAT BIKE for now! Quote Link to comment Share on other sites More sharing options...
slowrideCX Posted September 9, 2009 Share Posted September 9, 2009 Josh I have a rear master cylender if you are still interested let me know. If you are going to NEXXT I will bring it with me. I am leaving in the morning so let me know by tonight so I can pack it. Quote Link to comment Share on other sites More sharing options...
GadgetXX Posted September 18, 2009 Share Posted September 18, 2009 Josh I have a black tank... It was in great shape, but had a light fall on it in the garage. I can dig it out ant take some pics if you are interested Mike Quote Link to comment Share on other sites More sharing options...
JasonW Posted September 18, 2009 Share Posted September 18, 2009 Mike, How much you looking to get out of that tank? I may be interested if Josh isn't. We need to get together for a ride sometime before the weather goes to shit. You still got the same number? Quote Link to comment Share on other sites More sharing options...
GadgetXX Posted September 18, 2009 Share Posted September 18, 2009 Mike, How much you looking to get out of that tank? I may be interested if Josh isn't. We need to get together for a ride sometime before the weather goes to shit. You still got the same number? Yes, same number. I hope that I will be able to ride again soon. It is a little hard to ride when you cant' use the fingers on your left hand. It is getting better, but I am not sure I would try and ride yet. Quote Link to comment Share on other sites More sharing options...
JB4XX Posted September 19, 2009 Author Share Posted September 19, 2009 Mike I want to see some pictures!! Thanks! Quote Link to comment Share on other sites More sharing options...
GadgetXX Posted September 20, 2009 Share Posted September 20, 2009 I will try and clean it up and take some pics this weekend. Quote Link to comment Share on other sites More sharing options...
JB4XX Posted September 20, 2009 Author Share Posted September 20, 2009 Thanks! I fixxed the master cylinder and found some wheel spacers in a drawer. Quote Link to comment Share on other sites More sharing options...
GadgetXX Posted September 22, 2009 Share Posted September 22, 2009 This side of the tank has a number of small chips in the paint. you can see them in this pic. Some of the spots are metal flake in the paint, so look close. This is a small surface scuff, that can probably be buffed out. you can see it just below the chisel. Tis is a small dent by the filler cap. the chisel is 1" wide for reference This is another small dent. Over all the tank is in good condition, I only saw 2 small dents, the scuff mark and the rock chips. It is clean on the inside with no rust. I think it could be buffed out and the small dents could clean up some. The scuff mark should go away. The rock chips are permanent, but could be less noticeable with some touch up paint. Let me know if you need more pictures Mike Quote Link to comment Share on other sites More sharing options...
JB4XX Posted September 22, 2009 Author Share Posted September 22, 2009 pm sent to GadgetXX Quote Link to comment Share on other sites More sharing options...
firedlt Posted September 22, 2009 Share Posted September 22, 2009 I have a an 03 black tank with a small dent in rt side where it fell over into a post. I will post pics no rust if anyone is interested. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.