dehning Posted August 9, 2009 Share Posted August 9, 2009 I'm posing the question here since I got zero response on vfrworld. My current project is a '99 VFR800 that got a little hurt in hurricane Ike. Almost everything is done, but I noticed that the clutch slave cylinder was leaking. I opened it up and I have a suspicion that a repair kit ain't going to stop the leak. (the cylinder walls are etched from something) So I was searching the web and I discovered that most VFRs, VTR1000 and RC51s use the same slave cylinder. I also noticed that the 05/06 CBR1000RR uses one that looks compatible. My question is this: Can anybody tell me if any of the CBR or Goldwing slave cylinders are compatible with the VFRs. The model number for the VFR's is 22860-MT7-000. I've attached 4 pics, #1 is the VFR part and the other three are CBR1000RR parts. Quote Link to comment Share on other sites More sharing options...
Skull Posted August 9, 2009 Share Posted August 9, 2009 Buy one off ebay and give it a try. Quote Link to comment Share on other sites More sharing options...
dehning Posted August 9, 2009 Author Share Posted August 9, 2009 I think I may do that. I just realized that the two little studs on most of the honda slave cylinders I see are actually intended to line up a label plate that was present on the VF500 era bikes. Typical Honda, design it right and don't fix it if it ain't broke! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.