ZedsDead Posted February 15, 2009 Share Posted February 15, 2009 Installed VFR bars on a 97 blackbird. All seems to be good with one exception: turn bars to the right and RPMs increase. I've tried unsuccessfully so far to figure out how this is occurring and how to remedy it. Any help or advice would be great. Quote Link to comment Share on other sites More sharing options...
Para045 Posted February 15, 2009 Share Posted February 15, 2009 Installed VFR bars on a 97 blackbird. All seems to be good with one exception: turn bars to the right and RPMs increase. I've tried unsuccessfully so far to figure out how this is occurring and how to remedy it. Any help or advice would be great. Lift up front of tank, there should be a clip under the front near the steering stem, unclip the cables from there and that should be enough Quote Link to comment Share on other sites More sharing options...
Banshee Posted February 16, 2009 Share Posted February 16, 2009 Usually caused by the cables just being a bit tight. The other thing to try is the cable adjuster on the right bar. Rerouting the lines would be better though. Quote Link to comment Share on other sites More sharing options...
ZedsDead Posted February 16, 2009 Author Share Posted February 16, 2009 Usually caused by the cables just being a bit tight. The other thing to try is the cable adjuster on the right bar. Rerouting the lines would be better though. Throttle cable adjustment fixed the problem. Thank you for the advice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.