Sybartic Posted June 11, 2008 Share Posted June 11, 2008 Have a 2001 XX. Got home last night, and the headlight went out as I pulled in the driveway. Thinking it's a bulb, I flicked the highbeam switch and got nothing there either. Cycled the key, and it made the headlight flicker and went out again. About 2-3 months ago I thought it flickered one day as I was pulling it out of the garage, but I assumed it was the crack and I was seeing things. Checked the bulbs this morning. Both good. Checked voltage at the bulb connections. 12 V on top on low beams. 12 V on both when high beams are on. Put the bulbs back on, and still nothing. Checked the fuse, it's good. Bulb connections look good, no unusual or extreme corrosion. Feeling like a ground problem to me, so I checked the loom a little bit, and didn't see anything that set off any red flags. The unusual part that I noticed was that when i (sometimes!) cycled the high beams this morning, it took about 3-5 seconds for the high beam indicator to flick on and I heard a click from the back. I can't isolate which relay that controls this, and I don't have a diagram to consult. I'm hoping that someone has had a similar problem and can point me in the right direction. Any ideas and help are greatly appreciated! 4.19 a gallon gas has parked the truck for the summer... or so i had hoped. Thanks in advance! Nick Quote Link to comment Share on other sites More sharing options...
Sybartic Posted June 11, 2008 Author Share Posted June 11, 2008 Disregard! I just now found and read the earlier thread discribing this problem. I got it figured out now. Nick Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.