chickenStripper Posted April 28, 2007 Share Posted April 28, 2007 Anyone have a good recommendation for XX-friendly gel- or foam-based grips? I'm looking for something a little larger than stack that will be comfortable over the long haul. Stock grips ('04) feel like I'm just resting on the clip-ons themselves! Thx, Terry '04 1100xx (black) / Nashville mailto:anderson_terry@hotmail.com Quote Link to comment Share on other sites More sharing options...
airborneXX Posted April 28, 2007 Share Posted April 28, 2007 Anyone have a good recommendation for XX-friendly gel- or foam-based grips? I'm looking for something a little larger than stack that will be comfortable over the long haul. Stock grips ('04) feel like I'm just resting on the clip-ons themselves! Thx, Terry '04 1100xx (black) / Nashville mailto:anderson_terry@hotmail.com Please explain how you have an '04 'bird on this side of the pond... I have and really like the BMW sport grips.Do a search here for the part numbers and check with your local BMW dealer for the grips. A good BMW parts guy will know exactly what you're talking about. Quote Link to comment Share on other sites More sharing options...
OrganDonor Posted April 28, 2007 Share Posted April 28, 2007 Simple/cheap fix. Get a set of Grip Puppies. They are foam sleeves that you slide onto your stock grips using soapy water. Once the water dries, the grips stay put. They are softer, and add some girth ( ) to your stock grips. I had them on my Bird, and Dave just ordered a couple of sets for our Goldwings. Linky Quote Link to comment Share on other sites More sharing options...
SGT Ski Posted April 28, 2007 Share Posted April 28, 2007 +1 on the 04 bird WTF over Quote Link to comment Share on other sites More sharing options...
chickenStripper Posted April 29, 2007 Author Share Posted April 29, 2007 Thanks for the pointers, gents! The explanation for the '04 Bird is that I buggered up the sig...mine is an '03. Also just got Convertibars installed, and am hoping I can get a Throttlemeister (heavy/black) that will fit them. Also got a Laminarlip, and am eyeballing up a Corbin gunfighter in anticipation for a great season (and the Honda Hoot). Would really like to find beefier rubber coated front pegs too...don't like the scrawny stock metallic ones much. Too bad the large pin holding the stock ones on looks like a pain to change out. Cheers, Terry '03 1100xx (black) / Nashville mailto:anderson_terry@hotmail.com Quote Link to comment Share on other sites More sharing options...
rcskisfast Posted April 30, 2007 Share Posted April 30, 2007 I put bikemaster foam touring grips on mine that I'm very happy with. But I do have a set of bmw grips sitting in my garage that I'm going to install before the winter over a set of daul-star heaters. Quote Link to comment Share on other sites More sharing options...
XXMAN Posted May 30, 2007 Share Posted May 30, 2007 I use Progrip gel 719's and gloves with gel in the palm seems to work well for me. Quote Link to comment Share on other sites More sharing options...
Para045 Posted May 31, 2007 Share Posted May 31, 2007 I use Progrip gel 719's and gloves with gel in the palm seems to work well for me. Did you mean the "791's" 791 as I don't see any "719's" on the site, also what type of gloves were they, do you have a link as I am looking at getting something like that because of problems with carpal tunnel and hands going numb Quote Link to comment Share on other sites More sharing options...
XXTi Posted June 1, 2007 Share Posted June 1, 2007 I've used Pro-Grip 714 for several years and they're great. You just have to cut the ends off and they fit fine. Quote Link to comment Share on other sites More sharing options...
Venus97 Posted June 17, 2007 Share Posted June 17, 2007 I use the Pro Grip Gels as well and Joe Rocket gloves with Gel stitched in the palm. The biggest factor in my experience is the angle of the levers. (level or up creates problems, angled down is natural extension of my hand) Quote Link to comment Share on other sites More sharing options...
XXMAN Posted July 30, 2007 Share Posted July 30, 2007 I use Progrip gel 719's and gloves with gel in the palm seems to work well for me. Did you mean the "791's" 791 as I don't see any "719's" on the site, also what type of gloves were they, do you have a link as I am looking at getting something like that because of problems with carpal tunnel and hands going numb THAT SITE MUST NOT CARRY THEM TRY A GOOGLE SEARCH FOR PROGRIP 719 AND THE GLOVES ARE OLYMPIA Quote Link to comment Share on other sites More sharing options...
Firedragon Posted September 25, 2007 Share Posted September 25, 2007 I have foam grips installed over the existing grips. Cost about £2.00 ($4.00) and feel great. Quote Link to comment Share on other sites More sharing options...
01xxallen Posted September 25, 2007 Share Posted September 25, 2007 I used a set of the foam grips. They are cheap and I figure if they last 3 months, they'd be worth it. Since my bike sits in a garage, not in the sun, they have held up for a year so far. I'm going to try to find the BMW ones. but with the bar ends attached, the foams look fine and feel good. (I didn't need grip glue, so they won't leave goo on the bars either.) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.