99Birdman Posted October 19, 2005 Share Posted October 19, 2005 I'm looking at going to the Eoropean headlight on/off switches since I upgraded to HID. Does anyone know if the wiring on the US models is already setup to accomodate the on/off switch or will I have to modify the wiring harness? Quote Link to comment Share on other sites More sharing options...
MileHi Posted October 19, 2005 Share Posted October 19, 2005 Here's the latest thread discussing this... http://www.cbr1100xxforums.org/forum/viewt...ean+switch+gear Quote Link to comment Share on other sites More sharing options...
99Birdman Posted October 19, 2005 Author Share Posted October 19, 2005 Thanks Ray. I read that thread and PM'ed Helvet about getting a set of the switches. I remeber someone else had installed a set and was wondering what was involved if I did get them (eg; do I have to modify the wiring or did Honda set it up to be universal and just not use it in the US) Quote Link to comment Share on other sites More sharing options...
MileHi Posted October 19, 2005 Share Posted October 19, 2005 I sorta remember that the pin outs are a bit different and you also gain a flash-to-pass button. Quote Link to comment Share on other sites More sharing options...
Red J Posted October 19, 2005 Share Posted October 19, 2005 http://www.cbr1100xxforums.org/forum/viewt...pic.php?t=21236 In short, if all you require is the right hand switch, it will plug in and you're good to go. If you decide to install the left switch to obtain the flash-to-pass function, it will require a little more work, but it's not that bad. Quote Link to comment Share on other sites More sharing options...
99Birdman Posted October 19, 2005 Author Share Posted October 19, 2005 Got it, thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.