Hairbear Posted November 21, 2004 Share Posted November 21, 2004 I picked up a "used" PCII and a K&N filter. I'd like to install'em on my 99'. They came from a Titantium bike....I don't know what they had for exhaust. I'm not familiar with the PCs. My ?. What do I look for after installing it. I don't have any paperwork or the cable to plug it in to my puter. I'm wondering..because it was already installed on a XX before...will I need to do anything and if I do..How will I know? ....unless I take it a shop w/a dyno. Thanx Tom Quote Link to comment Share on other sites More sharing options...
Guest rockmeupto125 Posted November 21, 2004 Share Posted November 21, 2004 There's nothing you can do except reset it to 0 map. You need the cable. You need the software, but you can download that from the website. Quote Link to comment Share on other sites More sharing options...
Hairbear Posted November 22, 2004 Author Share Posted November 22, 2004 Joe..would you sugggest that I take it to a shop instead? Is a dyno needed for setting the proper map? Thanx for the info. Tom Quote Link to comment Share on other sites More sharing options...
99Birdman Posted November 22, 2004 Share Posted November 22, 2004 Hairbear The cable you need can be picked up at the local Best Buy or Office Depot. It's a standard 9pin PC Monitor extension cable male to female. As Joe said, you can download the software from the Dynojet site: http://www.powercommander.com/ If you are running a stock bike except for the K&N, the M102-001 map worked well for a friend of mine: http://www.powercommander.com/102-111.shtml Of course, this assumes you have access to a laptop or other PC you can get within cable distance to the bike. Good luck. Mike Quote Link to comment Share on other sites More sharing options...
Guest rockmeupto125 Posted November 22, 2004 Share Posted November 22, 2004 Heh, heh..........good call on the cable, Birdy. Tom......you ain't going anywhere soon. Sometime over the winter I'll stop down and we can check what's in it and throw a map in it. Quote Link to comment Share on other sites More sharing options...
Hairbear Posted November 24, 2004 Author Share Posted November 24, 2004 Whattamean.Ain't goin' anywhere anytime soon! I was on the bike today. I took her for a test ride down to the bank. It was cold....man did I miss riding. The wifes got a laptop. Thanx on the heads up for what cable I needed. Joe..true...I really don't need to do this now. I TECHNICALLY can't ride until off medical leave.SHHHHHHHH!!!!! tom Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.