bar10dah Posted September 6, 2004 Share Posted September 6, 2004 I can't find them with search! Too many damned hits! Quote Link to comment Share on other sites More sharing options...
Redbird Posted September 6, 2004 Share Posted September 6, 2004 Loosen the top of the right upper fairing, or remove it completely. CCT is on the back of the cylinder block, remove the cap nut from it, remove the two bolts holding it in, remove CCT. Clear any gasket material from the block, install new CCT and gasket using the two bolts you removed, torque to 7ft/lbs. Remove key, install cap bolt and washer from old CCT. Done Quote Link to comment Share on other sites More sharing options...
Hobicus Posted September 6, 2004 Share Posted September 6, 2004 http://www.exodus-dev.com/teletactics/pers...cct_swap_en.htm With pictures! Quote Link to comment Share on other sites More sharing options...
bar10dah Posted September 6, 2004 Author Share Posted September 6, 2004 :???: I get the idea, but that was tough to read! :wink: Quote Link to comment Share on other sites More sharing options...
bar10dah Posted September 6, 2004 Author Share Posted September 6, 2004 I thought Joe had something on his site, but I didn't see it. Perhaps it was someone else's site? I'll have to start sifting through my post subscriptions... Quote Link to comment Share on other sites More sharing options...
bar10dah Posted September 6, 2004 Author Share Posted September 6, 2004 Wohoo! Found it!! :grin: http://www.cbr1100xx.org/forum/viewtopic.p...7&highlight=cct Quote Link to comment Share on other sites More sharing options...
Helvet Posted September 6, 2004 Share Posted September 6, 2004 http://www.exodus-dev.com/teletactics/pers...cct_swap_en.htmWith pictures! I think my Japanese is better than his English..... (and I am Dutch... ) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.