SD Marc Posted September 3, 2004 Share Posted September 3, 2004 I am doing the seering head bearings and need a steering stem socket. Do I need the Honda socket or would I be able to find one of these some place else? TIA Quote Link to comment Share on other sites More sharing options...
Steve Posted September 3, 2004 Share Posted September 3, 2004 Get either a 35MM or an SAE 1 3/8" works also and should be much cheaper. Remeber the torque specs are 76 ft/lbs on the center nut. Good luck Quote Link to comment Share on other sites More sharing options...
Steve Posted September 3, 2004 Share Posted September 3, 2004 Get either a 35MM or an SAE 1 3/8" works also and should be much cheaper. Remeber the torque specs are 76 ft/lbs on the center nut. Good luck Quote Link to comment Share on other sites More sharing options...
SD Marc Posted September 3, 2004 Author Share Posted September 3, 2004 Thanks, I will give that a shot. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.